Selecting Talkgroups By Index; Terminal Permanent Disable; Temporary Disable Or Enable; Wireless Application Protocol (Wap) - Motorola TETRA MTM5000 Series User Manual

Example: Radio displays SpeedNum1*, which means that this talkgroup speed number is 1.
5.17.2

Selecting Talkgroups by Index

Procedure:
1 From the home screen, enter talkgroup speed number and *.
2 Press Attach.
NOTICE: To start a group call, press the PTT button.
5.18

Terminal Permanent Disable

NOTE: This is a Software Selling Feature.
Your radio is provided with a feature that allows your service provider to disable it permanently in case
it is stolen or lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent
Disable, your service provider cannot enable your radio. It is recommended to Permanent Disable your
radio only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can
be reactivated by returning it to Motorola Solutions.
5.19

Temporary Disable or Enable

Your radio is provided with a feature that allows your service provider to disable it temporarily in case
it is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is
turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled,
you may resume normal operation.
5.20

Wireless Application Protocol (WAP)

NOTE: This is a Software Selling Feature. This feature is not supported from MR2022.2
onwards.
Wireless Application Protocol (WAP) is a standard for application layer network communications in
a wireless communication environment such as TETRA network. The protocol is used to access the
mobile web from a radio through a WAP browser.
5.20.1

WAP Browser

NOTE: This feature is not supported from MR2022.2 onwards.
The Openwave Mobile Browser is a Wireless Application Protocol (WAP)-compliant user agent. The
WAP browser, available only in TMO mode and on a network with Packet Data enabled, provides all
the basic services of a computer web browser. Depending on the CPS configuration, the display can
return to the browser session automatically after an interruption by the preemptive display. The WAP
68015000180-MR
Chapter 5 : Features
137