Application Notes - HBK Z30A Mounting Instructions

4

APPLICATION NOTES

Force transducer Z30A
Series Z30A precision force transducers measure tensile and compressive forces.
They measure static and quasi‐static forces with great accuracy and reproducibility and
therefore require judicious handling. You must be particularly vigilant when transporting
and installing the devices. If the transducers are dropped or jolted, permanent damage
could be caused.
Z30A force transducers complete with DKD certificate from HBM
Force transducer calibrated to guaranteed class 00 according to ISO 376.
As standard these transducers are calibrated in the tensile direction. On request they can
also be calibrated in the compressive direction to DKD standards.
The limits for permissible mechanical, thermal and electrical stresses are stated in the
specifications. Be sure to allow for them when planning, installing and operating the
measurement configuration .
Z30A
7
APPLICATION NOTES