Structure And Mode Of Operation; Measuring Body; Housing; Disturbance Variables - HBK Z30A Mounting Instructions

5

STRUCTURE AND MODE OF OPERATION

5.1

Measuring body

The measuring body comprises a system of measuring body with strain gages (double
bending beam principle).
5.2

Housing

The enclosure provides protection against splashes and minor impacts (IP50 degree or
protection per DIN EN60529).
5.3

Disturbance variables

Torsion, bending and transverse loads are disturbance variables and are therefore to be
avoided. If necessary they can be remedied with HBM mounting accessories (see
chapter 7.3 ).
8
STRUCTURE AND MODE OF OPERATION
Z30A