Before installing the Camera, pay attention to the following instructions.
Make sure that there is no obvious damage of the Camera, and the accessories are complete.
Do not disassemble the Camera randomly. Operate it in accordance with the manual.
Connect the Camera to power supply specified in "2.7 Electric Specification."
Always use the Camera under the air pressure, operating temperature and operating humidity
specified in "2.8 Environment Requirements."
Explosion-proof products are special. Power and debug them indoors, and familiarize them
before installation.
3.1
Installation Accessories and Tools
Figure 3-1
Tool
3
Installation
Dimensions of the bracket and installation holes (mm)
Table 3-1 Tools
Description
1 cross screwdriver: 6
1 hexagon adjustable wrench: 300
6
150
×
36
×
Installation Manual