Device Installation; Installation Steps - Dahua F Series Quick Start Manual

Hd ir dome network camera

Hide thumbs Also See for F Series:

Table of Contents

2 Device Installation

Note:



The following installation figures are for reference only; please refer to Figure 2-1 and

Figure 2-2 according to the actual product.



Please make sure the bracket installation surface can sustain at least 3X weight of the

camera and the bracket.



Please cut off the device power when installing Micro SD card.

Step 1

Use the wrench in the accessories bag to unscrew three flower head screws on the dome enclosure,

and then open the dome enclosure.

Note:

As for the device with plastic enclosure, you can directly rotate the enclosure anticlockwise and open

the dome enclosure.

Step 2

Note:

Please implement this step when it needs to use Micro SD card and there is a Micro SD card slot for

the device.

Find the "Micro SD" sign in the device; adjust the direction of Micro SD card according to the direction

shown on the device, insert the card into the slot and install the Micro SD card well. See Figure 2-2 for

more details.

Figure 2-1

Table of Contents