Table of Contents
Advertisement
3 Installation
Step 1
Dig three holes in the wall (or ceiling) and then insert the three expansion bolts into the holes. Fix
these bolts.
Step 2
Line up the three screw holes at the bottom of the pendent bracket to the three installation holes you
just dug in the wall (or ceiling). Insert the three screws into the three holes of the bracket (at the
bottom). During the process, you need to loosen the M4 pinching screw of the bracket to adjust the
camera angle so that you can secure the device on the wall or the ceiling. See Figure 3-2.
Step 3
Connect the device video output port to the terminal devices such as the DVR, NVS and etc. Then
connect the power cable to the device.
Now you have completed dome camera installation and cable connection.
You can use the terminal devices such as the DVR, NVS and etc to view the monitor video.
Figure 3-1
Figure 3-2
8
Advertisement
Table of Contents
