Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: H-NC17-01-01-SL / H-NC17-01-02
Part Description: Head Light Guard – HONDA NC750X (2016-2020)
Installation / Parts List / Bill of Material for Mounting
No. Description
1
Head Light Guard
2
Grommet
3
Upper Bracket
4
Mounting Pin
5
Lower Bracket
6
Rubber Spacer
7
Washer M5
8
Washer M6
9
Screw M5 x 10
10 Spacer 7 mm
11 Delring Spacer 3 mm
12 Screw M6 x 20
13 Nut M6
SRC Design uses Metric System of Measurement and all dimensions are in Millimeters
* Recommended to use the Torque specified in the table
** Denotes Usage of Liquid Thread Locker in specified locations
Copyright By SRC
Design and Specification are subjected to change
Quantity Torque * (N-m)
1
4
1
4
1
1
4
2
4
5 - 6
2
8
2
2
9 - 10
Remarks **
Use Liquid Thread Locker
Use Liquid Thread Locker
Page 1
Advertisement
Related Manuals for SRC H-NC17-01-01-SL
Summary of Contents for SRC H-NC17-01-01-SL
- Page 1 9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
-
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2... -
Page 3: Mounting Instructions
1 off at the rear side of the flaps of the Upper Bracket and slip-in the Mounting screws which were removed in the earlier step and secure the threads. Copyright By SRC Design and Specification are subjected to change Page 3... - Page 4 Washer M6 (8) – 2 off from the rear side of the Lower Bracket and Slip-in Spacer 7 mm (10) – 2 off and secure the threads in the screws using Nut M6 (13) – 2 off. Copyright By SRC Design and Specification are subjected to change Page 4...
- Page 5 Bracket. The Mounting Pins have a Body shank, after the Bullet nose, which securely holds the Grommet bore, there by holding the Head Light Guard in its position. Copyright By SRC Design and Specification are subjected to change Page 5...
- Page 6 Final Mounted condition of the Head Light Guard is as shown in the above drawing. Copyright By SRC Design and Specification are subjected to change Page 6...
-
Page 7: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.
Need help?
Do you have a question about the H-NC17-01-01-SL and is the answer not in the manual?
Questions and answers