SRC H-X-ADV-07-01-AL Installation Manual page 4

Step 3:
Orient and Align the GPS Bar (2) and
Slip-in the Washer M8 (9) and Screw
M8 x 20 (10) – 1 off from either end,
and secure the threads on the End
Adaptor (3). The GPS Bar (2) and End
Adaptor (3) are Integral (Welded
together).
Copyright By SRC
Design and Specification are subjected to change
After following Step 1 and Step
2, the As Is Mounted Condition,
is a shown in the drawing on the
left-hand side.
Page 4