Advertisement
Removing the Lens (if necessary)
What has to be
Before installing the new lens , the old lens has to be removed from the projector.
done
Necessary Tools
no tool necessary
Warning !
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Removing the
To remove the lens, follow the next procedure or look into the owner’s manual :
Lens
image 1
image 3
BARCO ——————————————————— 2
Step
Action
1
Slide the lensdoor to the left
2
Release the lens by pulling the unlock handle (located on
the right side of the projector) and at the same time
maintaining the lens with one hand to prevent it from
falling
3
Remove the lens out of its housing
image 2
To be continued on next page
————————————— Projection Systems
Image
1
2
3
Advertisement
