Table of Contents
Advertisement
14 POSITION/TIME DISPLAYS
Displays the current position and time
when valid GPS data is received, or
when manually entered.
Received GPS data:
• "No Position No Time" is displayed if
no GPS data is received for 2 minutes
after turning ON the transceiver, and
then a warning message is displayed.
• "??" blinks if no GPS data is received
for 30 seconds after receiving valid
GPS data, and then "??" and a
warning message are displayed
alternately after 10 minutes.
• A warning message is displayed if no
GPS data is received for 4 hours after
receiving valid GPS data.
L "Local" is displayed when the UTC
Offset time is set. (p. 65)
Manually entered GPS data:
• A manually entered GPS data is
valid for 4 hours, and then a warning
message is displayed.
L "Manual" is displayed.
15 CHANNEL NAME
• The channel name is displayed, if
entered. (p. 18)
• "SCAN" or "SCAN 16":
Displayed while scanning. (p. 20)
• "DUAL 16" or "TRI 16":
Displayed while using the Dualwatch
or Tri-watch function. (p. 21)
16 OPERATING CHANNEL NUMBER
(p. 13)
Displays the selected operating channel
number.
17 STATUS INDICATOR
• STBY: Standby mode.
• RT:
Displayed while in the Radio
Telephone (RT) mode.
L Returns to the Standby mode if no
operation occurs during the preset
period of time.
• DSC: Displayed while in the DSC
mode.
18 STATUS INDICATOR (p. 16)
• TX:
Displayed while transmitting.
• MONI: Displayed while the Monitor
function is activated.
• BUSY: Displayed while receiving, or
the squelch is open.
PANEL DESCRIPTION
■ Software Keys
Various often-used functions are assigned
to the Software Keys for easy access. The
functions' icons are displayed above the
Software Keys, as shown below.
D Selecting a Software Key
function
1.
Push [◄] or [►] to slide through the
selectable functions that are assigned
to the Software Keys.
2.
Push the Software Key under the
function's icon to select the function.
NOTE: The displayed icons or their order
may differ, depending on the transceiver
version or the presetting. Ask your dealer
for presetting details.
When the MMSI code is not set, the
Software Keys for the DSC function are
not displayed.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
6
Advertisement
Table of Contents
