Table of Contents
Advertisement
D Sending a Group call
A Group call enables you to send a DSC call to only a specific group.
L You can send a Group call to a pre-entered group address, or manually enter the address
before sending. (p. 22)
1.
Push
.
• The "Compose Other" screen is displayed.
L You can also display the "Compose Other" screen by
selecting the "Compose Other" item on the Menu screen.
2.
Select "Message Type," and then push [ENT].
• The "Message Type" screen is displayed.
3.
Select "Group," and then push [ENT].
• The Group call is selected, and returns to the "Compose
Other" screen.
4.
Select "Address," and then push [ENT].
• The "Address" screen is displayed.
5.
Select the group to send a Group call, and then push
[ENT].
L You can also select "Manual Input" to manually enter the
target group.
6.
Select "Channel," and then push [ENT].
7.
Select the channel to assign, and then push [ENT].
L The assigned channels are preset by default.
8.
Push
to send the Group call.
• "Transmitting Group Call" is displayed, and then the assigned
channel is automatically selected.
L If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
9.
Hold down [PTT] to communicate.
DSC OPERATION
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
30
Advertisement
Table of Contents
