Device Parts Front LED indicators Display Keypad Microphone I/O connector Battery lock (Left) Scan button (Left) USB connector with cap Center LED indicator (Left)
Page 3
Device Parts Scanner & Top Camera Speaker Gun handle connection part Battery Battery lock (Right) Scan button (Right) Center LED indicator (Right) Power button...
Page 4
Product Standard Accessories Battey Replacement Extended battery pack Handstrap (5,700mAh) AC/DC power supply Stylus pen and tether Remove Battery 1. Press and hold left & right battery lock simultaneously to release the battery 2. Pull the bottom of the battery up to remove the battery AC plug LCD protection film Insert Battery...
Page 5
Install SIM, SD Turn on & off PM451 PM451 supports micro SIM and microSD card. In order to install the cards, remove the battery and follow below steps. 1. Grap the hole of card slot cover and pull it up using a fingertip to open 2.
Power LED Blinking red range < Caution > / Battery is very low 1. Always use an original power supply from Point Mobile. Alternately Other chargers and cables may damage the PM451. blinking Cannot recognize the main battery The device warranty does not cover any damage caused by &...
Scan a Barcode Certification Scanner is placed on the top of the PM451. Press the scan Model: PM451 button to scan a barcode. Trade name of certified: Point Mobile Co. Ltd. Manufacturer: Point Mobile For more certificate Information, Please aim the middle of the barcode.
Need help?
Do you have a question about the PM451 and is the answer not in the manual?
Questions and answers