There will be a Zoom 4X Editing icon at the bottom right of the screen,
as shown in Figure 4.5-4. The small rectangle with four direction
arrows in this icon represents the current full screen image, you can
judge where this area is in the original image.
◼
Moving the zoomed image
As the same as Zoom 2X editing mode, scroll the joystick up, down,
left or right to move the displayed area to the relevant direction, then,
press the joystick straight down to confirm and finish the movement
and exit the Zoom 4X Editing mode.
3.
Original Image Mode
◼
Original Image Mode
In Zoom 2X mode or Zoom 4X mode, press the joystick straight down,
it will recover and display the original image.
The scene tools are not editable in ZOOM 2X or ZOOM 4X mode.
4.6 Supported Signal Format
The supported signal format for this device is as shown in Table 4.6-1:
Figure 4.5-4 Zoom 4X Editing Mode
19
Features