Black; Brightness, Contrast, Color - Hitachi PJTX200J User's Manual And Operating Manual

BLACK

BLACK refers to the auto iris control modes as shown in
the table below. The auto iris is automatically controlled
to adjust the black level according to the mode selected.
1.
Press the BLACK button.
Each time the button is pressed the mode will
change and a dialog indicating the selected mode
will be displayed.
TURN OFF  AUTO1  AUTO2
BLACK
TURN OFF
AUTO1
AUTO2
NOTE
• The screen may flicker when the AUTO1 or AUTO2 modes are selected.
• The BLACK function can also be accessed via the EASY MENU (32) or the
PICTURE menu in the Advanced Menu (41).

BRIGHTNESS, CONTRAST, COLOR

The brightness, contrast and color can be easily
adjusted to suit your preferences.
1.
On the remote control press either the
buttons under the item you want to adjust.
The projector will then display a dialog to aid you
in adjusting the item.
2.
Use the and
item.
BRIGHTNESS
NOTE
• Pressing the RESET button while the dialog is displayed resets the
adjustment.
• The BRIGHTNESS, CONTRAST and COLOR functions can also be accessed
via the EASY MENU (33) or the PICTURE menu in the Advanced Menu
(37, 40).
• The COLOR function can only be used for video, s-video, component video or
HDMI signals.
The auto iris is always open.
The auto iris displays a better black for dark images.
The auto iris displays the best black for dark images.
cursor buttons to adjust the
Bright
↕
Dark
+0
CONTRAST
Mode characteristics
or
Strong
↕
Weak
+0
Basic operation
Strong
↕
Weak
+0
COLOR
27