Table of Contents
Advertisement
Troubleshooting
Regarding the indicator lamps
The meanings of the lighting patterns of the POWER indicator, the LAMP
indicator, and the TEMP indicator are described in the table below. Please follow
the instructions within the table. If the same indication is displayed after trying
the solutions below, or if an indication other than the following appears, please
contact your dealer or service company.
POWER
LAMP
indicator
indicator
Lit In
Turned
Orange
off
Blinking
Turned
Green
off
Lit In
Turned
Green
off
Blinking
Turned
Orange
off
Blinking
(varies)
Red
Blinking
Red
or
Lit In
Red
Lit In
Green
(Continued on next page)
62
TEMP
indicator
The projector is in a standby state.
Turned
Please refer to the "Turning the power on" (20) and
off
"Turning the power off" (23).
Turned
The projector is warming up.
off
Please wait.
Turned
The projector is on and ready.
off
Ordinary operations may be performed.
Turned
The projector is cooling down.
off
Please wait.
The projector is cooling down. An error has been
detected.
(varies)
Please wait until the POWER indicator finishes blinking,
and then try the suggested solution, referring to the
following error descriptions.
The lamp will not light, and there is a possibility that
interior of the projector has overheated.
Please turn the power off, and allow the projector to cool
down for at least 20 minutes. After the projector has
cooled down sufficiently, please confirm the following
Turned
items, and then turn the power on again.
off
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after trying the
solutions above, please change the lamp according to the
directions in "Lamp" (56, 57).
Description
Advertisement
Table of Contents
