Control buttons
POWER indicator (20, 23, 62)
This indicator blinks while the
projector is cooling down or
warming up
► Note that a lit or blinking red
indicator denotes a problem.
TEMP indicator (62)
► Note that a lit or blinking red
indicator indicates a problem.
MENU button (30, 35)
Used to begin or end a menu
operation.
Ports
HDMI port (14)
COMPONENT VIDEO
ports (13, 14)
This is a set of input
ports composed of Y, C
P
and C
/P
ports.
B
R
R
CONTROL port (15)
NOTE
• Use only an HDMI cable marked with the HDMI logo for HDMI
connections.
• The TRIGGER port (12V/25mA) is used to connect to a screen that can be
controlled via a trigger signal from display equipment.
S-VIDEO port (13)
/
B
Power switch (20, 23)
STANDBY/ON button (20, 23)
Used to turn the power on and off.
LAMP indicator (62)
► Note that a lit or blinking red
indicator indicates a problem.
Cursor buttons ▲,▼,◄,►
Used to make adjustments and
operate menus.
ENTER button (30, 35)
Used to proceed to the next stage
in a menu operation.
RESET button (31, 36)
Used to cancel an adjustment.
INPUT button (21)
Used to select an input signal. Pressing this
button toggles between input ports.
Before use
TRIGGER port
Restart switch
(23, 64)
COMPUTER port
(15)
Kensington lock
slot
VIDEO port
(13, 14)
AC inlet (17)
7