Isotra ZIP Technical Manual
  1. Manuals
  2. Brands
  3. Isotra Manuals
  4. Window Blinds
  5. SCREEN ZIP
  6. Technical manual

Isotra ZIP Technical Manual

Screen blinds
Hide thumbs Also See for ZIP:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
TECHNICAL MANUAL
SCREEN
BLINDS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZIP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Isotra ZIP

Summary of Contents for Isotra ZIP

  • Page 1 TECHNICAL MANUAL SCREEN BLINDS...

  • Page 2: Table Of Contents

    Basic Product Specification Measurement and Assembly A mark symbolising long tradition, inestimable investment into development, the use of quality materials, state-of the-art technologies, reliable work from hundreds of employees and numerous other parameters, contrituting one entity - the final product of ISOTRA.

  • Page 3: Ce Product Marking

    SCREEN BLINDS CE Product Marking...
  • Page 4 SCREEN BLINDS...

  • Page 5: Screen Alfa-Zip

    SCREEN BLINDS SCREEN ALFA-ZIP 2 types of modern boxes: square box for austere  architecture or rounded box for more traditional buildings, both types available in 2 sizes Weighted bottom slat to guide and tension the fabric  Wind class 6 ...

  • Page 6: Basic Product Specification

    SCREEN BLINDS SCREEN ALFA-ZIP Basic Product Specification 20/130 20/80-83 20/1 20/10 20/50 20/60 20/90-93 20/20 ZPA013 ZPA011/110 ZPA009 ZPA011 ZPA010 ZPH123 ZPH115-1 ZPH160 ZPA010/110C 20/40 /110P /110Z ZPH124 ZPH161 20/20 ZPA020 ZPH163 ZPA004/110P ZPH164 ZPA010 20/111 /110H 20/40 ZPA017 ZPA002/110P...
  • Page 7 SCREEN BLINDS Specification (for handle) Bottom rail Side guidance square rounded high guide rail Abbreviation BOX for SCREEN ALFA ZPA012 ZPH152 ZPH153 ZPH154 ZPH156 ZPH155 Dimension 90x90 90x90 18x50 30x55 20x55 40x55 30x110 20x110 (mm) 110x110 110x110 Material 110x110(120) (2-01578-PU11) 110x110(120) (2-01578-PU11) 110x110(120) (2-01579-PU11) 110x110(120) (2-01579-PU11)
  • Page 8 ZPH091 6-013963-9004 10/80 Safety lock of bottom slat end piece SC800 – RIGHT BLACK ZPH097 6-013965-9004 BOX for SCREEN ALFA-ZIP - 110 (2-01578-PU11 square / 2-01579-PU11 quarter-round) position item name business name drawing number 20/1 Profile – holder Alfa 110 Pergola...
  • Page 9 P 051/1/x ZPH146 P 053/1 ZPH114 P 057/15 P 052/1 KLIKA ÚPLNÁ ONÍMATELNÁ PRO SCREEN 2-01436-XXXX- 2-01372-XXXX-0 2-01436-XXXX-A Control handle - SCREEN ALFA-ZIP (2-01372-XXXX_0) position item name business name drawing number Cranked handle ZPH114 6-014323-0000 Locking ring with pin ZPH146 6-014451-0000...

  • Page 10: Motor Control

    ZPA014 6-015621-0000 Motors (Geiger) Screen ALFA-ZIP (2-00530-0002) position item name business name drawing number Motor Geiger Solid Line Zip AIR 6/16 PR0790/06 6-015903-0006 Motor Geiger Solid Line Zip AIR 10/16 PR0790/10 6-015903-0010 Motor Geiger Solid Line Zip AIR 20/16 PR0790/20 6-015903-0020 Carrier SOLID line AIR –...
  • Page 11 SCREEN BLINDS SCREEN ALFA-ZIP Technical specification Upper profile – square Upper profile – quarter-round 90x90 (2-01656-PU11) 90x90 (2-01657-PU11) 110x110 (2-01578-PU11) 110x110 (2-01579-PU11) Upper profile – square – with wider side piece Upper profile – quarter-round – with wider side piece...
  • Page 12 PŘE PŘEDNÍ DÍL SCREEN BLINDS ZADNÍ DÍL ZADNÍ DÍL Wall/ceiling holder MONTÁŽNÍ PROFIL DRŽÁK STĚNA/STROP POJISTKA MONTÁŽNÍ PROFIL Wall/ceiling holder Safety lock DRŽÁK STĚNA/STROP POJISTKA Wall/ceiling holder Safety lock PŘED PŘEDNÍ DÍL PŘEDNÍ DÍL PŘEDNÍ DÍL Front part Front part ZADNÍ...
  • Page 13 DRŽÁK STĚNA/STROP DRŽÁK STĚNA/STROP SCREEN BLINDS DRŽÁK STĚNA/STROP DRŽÁK STĚNA/STRO DRŽÁK STĚNA/STROP POJISTKA MONTÁŽNÍ PROFIL Box 110 Box 110 PŘEDNÍ DÍL PŘEDNÍ DÍL Box 90 Box 90 ZADNÍ DÍL ZADNÍ DÍL Holder for pergola (assembly profile) MONTÁŽNÍ PROFIL Assembly profile DRŽÁK STĚNA/STROP POJISTKA MONTÁŽNÍ...
  • Page 14 SCREEN BLINDS Bottom profile, large (7-303495-0000) Material: extruded aluminium profiles: - with powder coating finish - with an area for the weighting strip - with a fabric groove - with a sealing rubber groove The fabric is attached to the bottom slat by a plastic rod Ø 3 mm. Sliding blocks - side covers for good attachment of the fabric Roller tube, dia.
  • Page 15 SCREEN BLINDS Guide rails for motor Material: extruded aluminium with powder coating finish Guide rail A839 (7-303494) Guide rail A830 (7-303492) - standard guide for attachment clips or small distances relative to the - flat guide rails without side (10 mm). attachment clips.
  • Page 16 SCREEN BLINDS Guide rails for crank Material: extruded aluminium profi les with a powder coated finish Guide rail A829 (6-013989) Guide rail A820 (6-014152) - standard guide for attachment clips or small distances - flat guide rails without attachment clips. relative to the side (10 mm).
  • Page 17 SCREEN BLINDS Side pieces: Basic side piece: - aluminium side piece with pins – die cast, - aluminium side piece complete with universal bearing plates made from black synthetic material. Central side piece: - aluminium side piece with pins – die cast, - holds the bearing in coupled roller blinds, or the universal bearing plate.
  • Page 18 SCREEN BLINDS Control – crank Interior control Standard: - grey plasticised foldable crank, - cardan joint – 90° or 45° or 0° (crank material: 6 mm square, 320 mm length), - magnetic bracket securing the crank to the wall, - the crank length depends on the screen height: L = H – 150 mm (with 90° joint), L = H – 350 mm (with 45°...
  • Page 19 Ovládání - klika SCREEN BLINDS Operating outlets for crank through wall Ø12 Ø12 Ø12 Ø12 detachable crank 90° detachable crank 90° detachable crank 90° detachable crank 90° outlet A outlet B outlet O outlet K Ovládání - motor Control – motor It is possible to choose the cable location Rozměry v mm left, terminal X (from side piece) only for box 110...

  • Page 20: Crank Control

    SCREEN BLINDS Screen roller blinds It is possible to use one box for 2 or 3 screen roller blinds. DVC: screens directly next to each other 1DVC2 2DVC2 - with guide rails in the middle: A865/A866 - for motor A855/A856 - for handle Possible with 1, 2, or 3 controllers.
  • Page 21 SCREEN BLINDS Pin guide assembly The box is installed in guide rails, and the rails move over the bracket pins. Pin guide assembly End stop End stop on the auxiliary guide rail Holders for guide rails A829, A839, A855, A865 Formaat A4 Formaat A4 With Al end stops on the bottom part for the end stop of bottom rail;...

  • Page 22: Measurement And Assembly

    SCREEN BLINDS Taking measurements of ALFA screen roller blind: Final width B = distance between side pieces. Final height H = height of the box and guide rail end pieces (thickness of guide rail end pieces = 2 mm) exclusive of the wall/ceiling holder or exclusive of the assembly profile.
  • Page 23 SCREEN BLINDS Installation of ALFA screen roller blind: There are several methods of roller blind installation depending on the installation situation. Variant A: Using the wall/ceiling holders Method 1. Attaching the box using wall/ceiling holders, sliding the guide rails on the side piece pin, and securing the gui- de rails by bolts.
  • Page 24 SCREEN BLINDS Step 3: Drilling the holes for the guide rails Guide rails A839, A829: Indicate holes to be drilled to the wall or another assembly sur- face. Use predrilled guide rails to do this. A – holes for attaching the guide rails (see Fig. below). B –...
  • Page 25 SCREEN BLINDS Step 5: Checking the assembly Always make sure the roller blind is properly installed: First, check horizontality of the box. Check whether both guide rails are parallel to one another and, at the same time, perpendicular to the box.
  • Page 26 SCREEN BLINDS Step 2: Drilling the holes for the guide rails Guide rails A839, A829: Indicate holes to be drilled to the wall or another assembly surface. Use predrilled guide rails to do this. A – holes for attaching the guide rails (see Fig. below). B –...
  • Page 27 SCREEN BLINDS Step 4: Fitting the box and guide rails Lift the box with the guide rails. Do this in cooperation with at least two other persons depending on the overall box width. Place the complete assembly to the window opening. Caution! Make sure not to break off...
  • Page 28 SCREEN BLINDS Variant B: Using the assembly profile Step 1: Installing the profile Place the profile to the assembly surface and indicate the spots according to the predrilled holes. The assembly surface must be perfectly horizontal! Predrill the holes according to the fasteners used and attach the assembly profile.
  • Page 29 SCREEN BLINDS Step 4: Attaching the box to the assembly profile, and attaching the guide rails Fit the box to the assembly profile. Make sure the box is correctly fitted to both lock along its length. Drive the provided M4 bolts to the predrilled holes. Use the spirit level to level the guide rail position, and fasten the rails with bolts.

  • Page 30: Solar Power Supply

    SCREEN BLINDS SCREEN ALFA-ZIP SOLAR Screen blind with exterior solar power supply is a unique and fully automated blind that is wirelessly controlled and has zero power consumption. This blind works on the principle of the so-called photovoltaic phenomenon – i.e. the conversion of solar radiation into electricity.
  • Page 31 SCREEN BLINDS Installation: The battery can be installed in the room, but can also be placed from the outside in a roller box, but provided that it is not exposed to direct sunlight and rain. The working temperature is from -20 ° C to + 70 ° C. The IP protection class is X4, which means that the product is splash- -proof at all angles.

  • Page 32: Screen Alfa Plus-Zip

    SCREEN BLINDS SCREEN ALFA PLUS-ZIP 2 types of modern boxes: square box for austere  architecture or rounded box for more traditional buildings Weighted bottom slat to guide and tension the fabric  Wind class 6  Simple and fast assembly ...

  • Page 33: Basic Product Specification

    SCREEN BLINDS SCREEN ALFA PLUS-ZIP Basic Product Specification 20/130 20/80-83 20/1 20/10 20/50 20/60 20/90-93 20/20 ZPA013 ZPA011/110 ZPA009 ZPA011 ZPA010 ZPH126 ZPH115-1 ZPH162 ZPA010/110C 20/41 /110P /110Z II 20/20 ZPA004/110P ZPA010 20/110 /110H ZPA017 20/41 ZPA002/110P 20/41 ZPA002 20/31...
  • Page 34 SCREEN BLINDS Standard Dimensions Guaranteed area (m Width (mm) Height (mm) Control max. min. max. min. max. motor iO, WT 4800 2500 Fabrics intended for ALFA 110 PLUS: SLTZ86 a SLTZ92 Common phenomena of technical fabrics The waviness of the fabric may occur around the welds or in the middle of the fabric, as different forces act on the fabric during use, and that´s why this effect is common.
  • Page 35 Guide - rail ALFA + LEFT / RIGHT (2-01642-PU11) position item name business name drawing number 900/20 End cap VL SC800 ZPH095 6-014441-0000 900/30 Spring VL ZIP SC800 ZPH147 6-013992-0000 900/40 Clip VL ZIP SC800 ZPH099 6-013993-0000 900/50 Guide profile SC800 for zip v3 ZPH145 6-014155-0000...

  • Page 36: Motor Control

    2012 ZPH162 Motors (SOMFY) Screen ALFA (2-00530-0009) position item name business name drawing number Motor Geiger Solid Line Zip AIR 6/16 PR0790/06 6-015903-0006 Motor Geiger Solid Line Zip AIR 10/16 PR0790/10 6-015903-0010 Motor Geiger Solid Line Zip AIR 20/16 PR0790/20 6-015903-0020 301–303...
  • Page 37 110x110 110x120 SCREEN BLINDS SCREEN ALFA PLUS-ZIP Box čtvrtkulatý Technical specification Box čtvrtkulatý Box hranatý 110x1 Box hranatý - rozšířený 110x110 110x110 Upper profile – square Upper profile – quarter-round 110x120 (2-01578) (2-01579) Box čtvrtkulatý Box čtvrtkulatý - rozšířený Box hranatý - rozšířený...
  • Page 38 PŘE PŘEDNÍ DÍL SCREEN BLINDS ZADNÍ DÍL ZADNÍ DÍL Wall/ceiling holder MONTÁŽNÍ PROFIL DRŽÁK STĚNA/STROP POJISTKA MONTÁŽNÍ PROFIL Wall/ceiling holder Safety lock DRŽÁK STĚNA/STROP POJISTKA Wall/ceiling holder Safety lock PŘED PŘEDNÍ DÍL PŘEDNÍ DÍL PŘEDNÍ DÍL Front part Front part ZADNÍ...
  • Page 39 SCREEN BLINDS Box 110 Holder for pergola (assembly profile) MONTÁŽNÍ PROFIL Assembly profile DRŽÁK STĚNA/STROP POJISTKA MONTÁŽNÍ PROFIL Assembly profile PŘEDNÍ DÍL Front part PŘEDNÍ DÍL PŘEDNÍ DÍL Front part ZADNÍ DÍL ZADNÍ DÍL Rear part ZADNÍ DÍL Rear part MONTÁŽNÍ...
  • Page 40 SCREEN BLINDS Bottom rail (6-015158-0000) The bottom rail consists of a two-piece, left and right sliding block and an extruded aluminium profile with a powder-coated finish. The profile has: • A groove for screw-free attachment of the fabric using a canvas rod of Ø 3 mm •...
  • Page 41 SCREEN BLINDS Guide rails for motor Material: extruded aluminium with powder coating finish Guide rail A839 (7-303494) Guide rail A830 (7-303492) - standard guide for attachment clips or small distances relative to the - flat guide rails without side (10 mm). attachment clips.
  • Page 42 SCREEN BLINDS Side pieces: Basic side piece: - aluminium side piece with pins – die cast, - aluminium side piece complete with universal bearing plates made from black synthetic material. STŘEDOVÁ BOČNICE BOČNICE PRO DRŽÁK STĚNA-STROP BOČNICE PRO MONTÁŽNÍ PROFIL Side panel for mounting profile Side panel for wall-ceiling bracket Universal bearing plate:...
  • Page 43 SCREEN BLINDS Control – motor Ovládání - motor It is possible to choose the cable location left, terminal X (from side piece) only for box 110 right, terminal X (from side piece) only for box 110...

  • Page 44: Measurement And Assembly

    SCREEN BLINDS Types of installation Type A-AE (on the wall) Type A-AE (into the reveal) Type B-BE (into the reveal) * A – outward winding “A” (standard) AE – outward winding “AE” (lighter exterior) B – inward winding “B” BE – inward winding “BE” (lighter exterior) * space for box opening Type 110...
  • Page 45 SCREEN BLINDS Pin guide assembly The box is installed in guide rails, and the rails move over the bracket pins. Pin guide assembly End stop Holders for guide rails A839 Formaat A4 With black Al end stop; thickness 2 mm. Certain guide rails may be supplied with predrilled openings in the sides.
  • Page 46 SCREEN BLINDS Taking measurements of ALFA PLUS screen roller blind: Final width B = distance between side pieces. Final height H = height of the box and guide rail end pieces (thickness of guide rail end pieces = 2 mm) exclusive of the wall/ceiling holder or exclusive of the assembly profile.
  • Page 47 SCREEN BLINDS Installation of ALFA PLUS screen roller blind: There are several methods of roller blind installation depending on the installation situation. Variant A: Using the wall/ceiling holders Method 1. Attaching the box using wall/ceiling holders, sliding the guide rails on the side piece pin, and securing the gui- de rails by bolts.
  • Page 48 SCREEN BLINDS Step 3: Drilling the holes for the guide rails Guide rails A839: Indicate holes to be drilled to the wall or another assembly sur- face. Use predrilled guide rails to do this. A – holes for attaching the guide rails (see Fig. below). B –...
  • Page 49 SCREEN BLINDS Step 5: Checking the assembly Always make sure the roller blind is properly installed: First, check horizontality of the box. Check whether both guide rails are parallel to one another and, at the same time, perpendicular to the box.
  • Page 50 SCREEN BLINDS Step 2: Drilling the holes for the guide rails Guide rails A839: Indicate holes to be drilled to the wall or another assembly surface. Use predrilled guide rails to do this. A – holes for attaching the guide rails (see Fig. below). B –...
  • Page 51 SCREEN BLINDS Step 4: Fitting the box and guide rails Lift the box with the guide rails. Do this in cooperation with at least two other persons depending on the overall box width. Place the complete assembly to the window opening. Caution! Make sure not to break off...
  • Page 52 SCREEN BLINDS Variant B: Using the assembly profile Step 1: Installing the profile Place the profile to the assembly surface and indicate the spots according to the predrilled holes. The assembly surface must be perfectly horizontal! Predrill the holes according to the fasteners used and attach the assembly profile.
  • Page 53 SCREEN BLINDS Step 4: Attaching the box to the assembly profile, and attaching the guide rails Fit the box to the assembly profile. Make sure the box is correctly fitted to both lock along its length. Drive the provided M4 bolts to the predrilled holes. Use the spirit level to level the guide rail position, and fasten the rails with bolts.

  • Page 54: Screen Hr7

    SCREEN BLINDS SCREEN HR7 Choice of 2 box modern designs: square box for austere  architecture or rounded box for more traditional buildings, both types available in 3 sizes, weighted bottom lath to guide and tension the fabric,  wind class 2, ...

  • Page 55: Basic Product Specification

    SCREEN BLINDS SCREEN HR7 510/2030-2032 Basic Product Specification 9/19-20 510/2020-2022 170-172 510/2011-13 180-182 510/2032 250-253 9/11 2-01329-XXXX (guide rails) 1/900/110-114 2-01355-XXXX (wire) 1/900/140-141 Control Used for lifting and lowering of screen blinds. There are available 2 types of control for all box sizes: Motor - standard asynchronous tubular motor LT50 (min.
  • Page 56 Sealing of bottom rail ZPH116 6-013974-0000 Bottom rail low HR7 ZPH073 6-014446-0000 bottom rail hight HR7/HR8-ZIP ZPH074 6-014021-0000 Plastic bar 4,0 mm PVC ZP0097/0004 6-016911-0004 Plastic bar 6,0 mm PVC ZPH169 6-015096-0000 Plastic bar 3,0 mm PVC...
  • Page 57 SCREEN BLINDS SCREEN HR7 Technical Specification Head rail - square Head rail - rounded (2-01356, 2-01357, 2-01358) (2-01360, 2-01361, 2-01362, 2-01363) 70x70 (2-01360-PU11) 70x70 (2-01356-PU11) 90x90 (2-01361-PU11) 90x90 (2-01357-PU11) 110x110 (2-01362-PU11) 110x110 (2-01358-PU11) guide slots mounting bracket mounting bracket back part back part front part front part...
  • Page 58 SCREEN BLINDS Mounting bracket - box 70 mm, 90 mm, 110 mm (6-014340, 6-014341, 6-014342) Material: extruded aluminium with a powder coating finish For installation of the box independent from the guides: standard for cable guide Width: 30 mm Brings the rear face of the box 10 mm forward for cable guide. It is necessary to specify the ZS or ZSTR attachment for cable guide or without guidance.
  • Page 59 SCREEN BLINDS Bottom rail low Bottom rail high (6-014446-0000) (6-014021-0000) Material: extruded aluminium profile with: - a powder coated finish - a room for a weighting strip - a fabric groove Fabric is attached to bottom rail, using a plastic tube Ø 3 mm Available in 2 sizes: low bottom rail as standard, high bottom rail (optional).
  • Page 60 SCREEN BLINDS Guide rails Material: extruded aluminium profiles with a powder coated finish Guide rail T725 (6-014415-0000) Guide rail T720 (6-014023-0000) - standard guide for clips attachment or small distance - flate guide without clips attachment relative to the rear face (10 mm). Guide calbe type T770 (6-014036-0000) - stainless steel cable guide, with stainless steel brackets or in option floorfitting...
  • Page 61 SCREEN BLINDS Consoles Basic consoles: - aluminium consoles with die-casted guide pin (nto with cable guide) = pin mounting, universal bearing plates in black synthetic material Middle consoles: - aluminium consoles with diecasted guide pin with support for - can hold the bearing for the coupled screen or universal bearing plate. basic console middle console Pin guide assembly - basic console...
  • Page 62 SCREEN BLINDS Operating exits Various exits are possible depending the operation. The exact location of the operation exit can be seen on the drawings. Consult these drawings before the installation. Control - handle Inside operation: Standard: - grey plasticized foldable handle, - 90°...
  • Page 63 SCREEN BLINDS Operating exits for handle through wall Ø12 Ø12 Ø12 Ø12 handle 90° handle 90° handle 90° handle 90° exit A exit B exit O exit K Control – motor Choice of cable location left, terminal X (from side part) for box 110 and 150 only right, terminal X (from side part) for box 110 and 150 only...
  • Page 64 SCREEN BLINDS Coupled screens It is possible to use 1 box for 2 or 3 screens. DVC: screens directly next to each other DVS: Screen with a small gap of: - Min 25 mm - Max 500 mm Maximum width of box is 6 m. Possible with 1, 2 or 3 operation: - Minimal width for each part is depending the operation.

  • Page 65: Measurement And Assembly

    SCREEN BLINDS SCREEN HR7 Assembly Pin guide assembly with guide rail and low bottom rail type 70 type 90 type 110 Assembly types Type A-AE (on the wall) Type A-AE (into reveal) Type B-BE (into reveal) A - coiling outwards „A“ (standard) AE - coiling outwards „AE“...
  • Page 66 SCREEN BLINDS Ping guide assembly The screenbox is assembled onto the guides. The guides mover over the pin of the consoles. Pin guide assembly End stop pin guide assembly Clips for guide 725 or 755 End stop pin guide assembly intermediate guide Fitted with an end stop in black plastic or end plate in aluminium at the bottom end to stop the bottom lath;...
  • Page 67 SCREEN BLINDS Guide cable 770 - pin guide assembly into reveal box size 29-37 bottom rail 15…23 11-14 high 1…9...
  • Page 68 SCREEN BLINDS Guide cable 770 - pin guide assembly on the wall box size bottom rail 11-14 high...

  • Page 69: Screen Hr8-Zip

    SCREEN BLINDS SCREEN HR8-ZIP Choice of 2 box modern designs: square box for austere  architecture or rounded box for more traditional buildings, both types available in 4 sizes, the weighted bottom rail for guiding and tighting the fabric, ...

  • Page 70: Basic Product Specification

    ZPH077 ZPH096 ZPH116/1 ZPH074 ZP0097/0003 ROLETA SCREEN HR8 BOX 110 ZIP - MOTOR 2-01330-0110-C 2-01330-0110-0 Control Used for lifting and lowering of screen blinds. There are available 2 types of control for all box sizes: Motor - standard asynchronous tubular motor LT50 (min. width of screen is 645 mm) or optional asynchronous tubular motor LT50 RTS, OXIMO RTS, Sunea Screen IO, ALtus RTS (min.
  • Page 71 SCREEN BLINDS Specification (for handle) Bottom Side guidance square rounded rail guide rail Abbreviation SCREEN HR8-ZIP box 110 ZPH152 ZPH153 ZPH154 ZPH156 ZPH155 Dimension 70x70, 90x90, 70x70, 90x90, 18x50 30x55 20x55 40x55 30x110 20x110 (mm) 110x110, 150c150 110x110, 150x150 Material...
  • Page 72 Guide rail 839 6-014417-0000 Guide rail 865 6-014420-0000 Guide rail 866 6-014421-0000 Guide profile for zip v3 ZPH145 6-014155-0000 Spring for guiding profile for zip ZPH147 6-013992-0000 Synthetic clips for guide rail - black ZPH099 6-013993-0000 Screw 4,2x25 DIN 7981 51660.042.025 6-014157-0000...
  • Page 73 SCREEN BLINDS SCREEN HR8-ZIP box 110 (2-01330-0110) position item name business name drawing number Profile BOX 110mm - front part square ZPH007 6-013978-0000 Sidewall 110mm square - RIGHT ZPH024 6-013977-0000 Sidewall 110mm square - LEFT ZPH023 6-013975-0000 Profile BOX 110mm - rear part...

  • Page 74: Screen Hr7, Hr8-Zip

    SCREEN BLINDS SCREEN HR7 a HR8-ZIP Control - handle ZPH146 P 054 ZPH117 P 057/15 ZPH113 MR 033/150 P 051/1/x ZPH146 P 053/1 ZPH114 P 057/15 P 052/1 KLIKA ÚPLNÁ ONÍMATELNÁ PRO SCREEN 2-01436-XXXX- 2-01372-XXXX-0 2-01436-XXXX-A Control handle – SCREEN HR (2-01372-XXXX-0)

  • Page 75: Motor Control

    Cable grommer - rubber - dia. 7 Mm ZPH150 6-014339-0000 2060 Cable clip 600x4,8 - black ZPH168 6-014438-0000 Screen motors (SOMFY) HR7/HR8-ZIP – BOX 70 (2-00530-0004) Position item name business name drawing number Motor ALTUS 40 RTS PR0298 6-002623-0009 Motor LS 40...
  • Page 76 SCREEN BLINDS SCREEN HR8-ZIP Technical Specification Head rail - square Head rail - rounded (2-01356, 2-01357, 2-01358, 2-01359) (2-01360, 2-01361, 2-01362, 2-01363) 70x70 (2-01356-PU11) 70x70 (2-01360-PU11) 90x90 (2-01357-PU11) 90x90 (2-01361-PU11) 110x110 (2-01358-PU11) 110x110 (2-01362-PU11) 150x150 (2-01359-PU11) 150x150 (2-01363-PU11) guide slots...
  • Page 77 SCREEN BLINDS Mounting bracket - box 70 mm, 90 mm, 110 mm, 150 mm (6-014340, 6-014341, 6-014342) Material: extruded aluminium with a powder coating finish For installation of the box independent from the guides: standard for cable guide Standard number of mounting brackets: Screen width (mm) 70 - 90 110 - 150...
  • Page 78 SCREEN BLINDS Bottom rail high (6-014021-0000) Material: extruded aluminium profile with: - a powder coated finish - a room for a weighting strip. - a fabric groove. - a groove for sealing rubber Fabric is attached to bottom rail without screws, using a plastic tube Ø 3 mm. Partially concealed in the screen box when fabric is rolled up Optional: rubber strip on the bottom rail With windowfabrics and CRYSTAL screens the bottom lath comes with an L-strut (40 x 20 x 2 mm) as a result...
  • Page 79 SCREEN BLINDS Guide rails (for motor) Material: Material: extruded aluminium profiles with a powder coated finish Guide rail T839 (6-014417) Guide rail T830 (6-014418) - standard guide for clips attachment or small distance relative - flat guide without attachment clips. to the rear side (10 mm).
  • Page 80 SCREEN BLINDS Guide rails for handle Material: extruded aluminium profi les with a powder coated fi nish Guide rail T829 (6-013989) Guide rail T820 (6-014152) - standard guide for clips attachment or small distance relative - fl at guide without attachment clips. to the rear side (10 mm).
  • Page 81 SCREEN BLINDS Consoles Basic consoles: - aluminium consoles with die-casted guide pin (= pin mounting) or - die-casted fastening hook (= flange mounting). - complete with universal bearing plates in black synthetic material. Middle consoles: - aluminium console with die casted guide pin: - can hold the bearing for the coupled screen or universal bearing plate.
  • Page 82 SCREEN BLINDS Ping guide assembly Operating exits for motor basic console middle console Control - handle Inside operation Standard: - grey plasticized foldable handle, - 90° or 45° or 0° cardan joint (handle material: 6 mm square, length 320 mm), - magnetic bracket for securing the handle to the wall, - the handle length depends on the screen height: L = H –...
  • Page 83 SCREEN BLINDS Operating exits for handle through wall Ø12 Ø12 Ø12 handle 90° handle 90° handle 90° handle 90° exit A exit B exit O exit K Control – motor Choice of cable location left, terminal X (from side part) for box 110 and 150 only right, terminal X (from side part) for box 110 and 150 only 125 130 125...
  • Page 84 2DVC2 - 2nd screen of 2 screens in common box B = box width B1 = width between screens SCREEN HR8-ZIP Measurement Finished width B = size between rear ends of the consoles. Finished height H = height including the box, including the...
  • Page 85 SCREEN BLINDS Assembly Pin guide assembly with guide rail 829 and 829 and 839 type 70 type 90 type 110 type 150 Assembly types Type A-AE (on the wall) Type A-AE (into reveal) Type B-BE (into reveal) A - coiling outwards „A“ (standard) AE - coiling outwards „AE“...
  • Page 86 SCREEN BLINDS Ping guide assembly The screenbox is assembled onto the guides. The guides mover over the pin of the consoles. Pin guide assembly End stop pin guide assembly Clips for guide 839 or 865 End stop pin guide assembly intermediate guide Formaat A4 Formaat A4 With Al end stops on the bottom part for the end stop of bottom rail;...

  • Page 87: Assembly

    SCREEN BLINDS SCREEN HR7 and HR8-ZIP Assembly Based on the installation situation, there are several ways the screen can be installed: Method 1. Affix the box using the mounting brackets, then slide the guide rails onto the console pivot and secure the gui- de rails with screws.
  • Page 88 SCREEN BLINDS Step 3: Drilling the mounting holes for the guide rails Mark the holes to be drilled on the wall or on the mounting surface. Use the pre-drilled lateral guide rails for this proce- dure. Drill the holes in the wall (Ø6 mm) or in the window frame (Ø3.2 mm).
  • Page 89 SCREEN BLINDS METHOD 2: Place the complete box / guide rail assembly in or against the window opening and screw them in place. max. 1500 see fig. 4 p. 6 through hole chamber of guide rail for clips through hole chamber of guide rail 4 mm Box type...
  • Page 90 SCREEN BLINDS Make sure the sliding blocks of the bottom slat enter the guide rail slots correctly and the zipper on the fabric slides into the U-shaped part of the plastic guide profile. Step 3: Positioning the box and the guide rails Now lift the screen box with the guide rails.
  • Page 91 SCREEN BLINDS Step 1: Drilling mounting holes and affixing the clips Mark the holes to be drilled on the wall or on the mounting surface (use the pre-drilled lateral guide rails for this purpose). Drill the holes in the wall (Ø6 mm) or in the win- dow frame (Ø3.2 mm), no more than 500 mm apart.

  • Page 92: Solar Power Supply Hr8-Zip

    SCREEN BLINDS SCREEN HR8-ZIP SOLAR Screen blind with exterior solar power supply is a unique and fully automated blind that is wirelessly controlled and has zero power consumption. This blind works on the principle of the so-called photovoltaic phenomenon – i.e. the conversion of solar radiation into electricity.
  • Page 93 SCREEN BLINDS Installation: The battery can be installed in the room, but can also be placed from the outside in a roller box, but provided that it is not exposed to direct sunlight and rain. The working temperature is from -20 ° C to + 70 ° C. The IP protection class is X4, which means that the product is splash- -proof at all angles.

  • Page 94: Screen Hr10-Zip

    SCREEN BLINDS SCREEN HR10-ZIP The box integrated in the cavity wall in the front  of the window, no perforation of the building shell,  fully integrated bottom lath in retracted position,  ideal for passive construction and energy-neutral living, ...

  • Page 95: Basic Product Specification

    2-01450-0000-0 Control Screen HR10-ZIP is always electrically operated. Motor – can be either on the left or on the rights. On the selected operating side there is the choice to have the cable run along the lateral guide or through a hole to be drilled in the top or back of the box profile.
  • Page 96 Guding Slat Profile 1040 for HR10-ZIP ZPH206 6-015203-0000 Guding Slat Profile 1040 front part ZPH207 6-015204-0000 Ending Piece VL 1040 - HR10-ZIP - LEFT/ RIGHT ZPH208 6-015205-0000 Guiding Line - Slat HR10-ZIP - right 2-01452-PU11P Guiding Slat Profile 1120 Cap...
  • Page 97 There is a cable duct (A) on the side console and a cable clamp (J) on the base plate to keep the motor cable in place. There is one type of box available for the HR10-ZIP integral screen. The dimensions of the box cross-section are 122 mm x 140 mm.
  • Page 98 SCREEN BLINDS Bottom rail (6-015158-0000) The bottom rail consists of a two-piece, left and right sliding block and an extruded aluminium profile with a powder-coated finish. The profile has: • A groove for screw-free attachment of the fabric using a canvas rod of Ø 3 mm •...
  • Page 99 (B) Holder for zipper profile glissiere (C) Base section guide rail 1120 (D) Clip for hinged section (E) Hinged section guide rail 1120 Optie A2656 : clipsprofiel Zip click profile Window Raam- zijde side The complete wide 1120 guide rails are made up of a base section (C), a hinged section (E) and a holder (B) with zipper profile (A), and at the bottom of the base section of each guide rail an aluminium end cap.
  • Page 100 The HR10-ZIP integral screen is always viewed along the INSIDE (see figure). The HR10-ZIP screen is always electrically operated. The operating side can be either on the left or on the rights. On the selected operating side there is the choice to have the cable run along the lateral guide or through a hole to be drilled in the top or back of the box profile (see figure).

  • Page 101: Measurement And Assembly

    SCREEN BLINDS SCREEN HR10-ZIP Measuring The dimensions to be specified are the width B and the height H. The finished width B is equal to the width of the box, which also corresponds to the distance between the outer sides of the left and right guide rails.
  • Page 102 SCREEN BLINDS 2. step Mount the base of the guide rail against the window with the screws supplied. Guide rail 1120 Fig.4 Fig.5 Fig.6 Guide rail 1040 = surface mounted guide rail 1120 DIN 7504N In order to screw the 4,8 x 25 MM cover onto the base, you will first need to...
  • Page 103 SCREEN BLINDS Guide rail 1120 - click profile Fig.8 The guide rails are supplied already assembled. The click profile must be removed from the base section. • The guide rails are supplied already assembled. The adjustment profile must be removed from the base section.
  • Page 104 SCREEN BLINDS Please note that only the click profile should be screwed on to the window. The base is then fitted to the adjus- tment profile using a click connection. Please note that there is a hole in the bottom of the adjustment profile. Place the supplied end cap here, between the screw and the profile.
  • Page 105 SCREEN BLINDS 3. step Follow the same procedure to install the other guide rail. Make sure that the screens are always dead level and installed perfectly square. This can be checked and corrected in one way only. 1. Check first whether the whole assembly is moun- ted dead level.

  • Page 106: Screen Zip

    SCREEN ZIP Decorative and modern building exterior element  Minimal penetration of light thanks to absolute fabric  tension high resistance to wind  heat regulating effect  insect protection in closed position  frame colour as per the RAL chart (except of plastic parts)

  • Page 107: Basic Product Specification

    SCREEN BLINDS SCREEN ZIP A 700/12 XY 00017 ZP0052/1 ZP0046 A 67/12 ZP0047 Basic Product Specification A 710/3 ZP0057/1 ZP0031/1 ZP0030/1 MR 024/1 ZP0001 ZP0005 ZP0025/1 ZP0058 ZP0058/1 ZP 0017 ZP0042 ZP0042/1 A 700/22 MR 035 A 700/3 ZP 0016...
  • Page 108 Winding roller for awnings dia. 78 mm - 6 m MR 024/1 6-011084-0078 Plastic bar PVC 6,0 mm ZP0097/0006 6-016911-0006 Black insertion ZIP for GS 40 ZP0016 6-008707-0001 Guide channel Al - GS 40 raw ZP0014 6-008705-0000 Guide channel ending Al - GS 40 raw...
  • Page 109 SCREEN BLINDS SCREEN ZIP Technical Specification Head rail C 105 Head rail CT 105 způsob uvedení tolerance rozměru ISO 2768-mK CHYBA!:norma 6 XX.X XX.XX 0,01 tolerovaná uložení f,g,h,... (F,G,H,...) způsob uvedení způsob uvedení tolerance rozměru tolerance rozměru ISO 2768-mK CHYBA!:norma 6...
  • Page 110 SCREEN BLINDS ZIP system Fabric Insert Zipper Brush Guide rail Guide bar cover Cristal fabric is fringed by strip of STNZ fabric Š - WIDTH SCREEN - HEIGHT SCREEN VS - HEIGHT LOWER VH - HEIGHT UPPER VC - HEIGHT CRISTAL...
  • Page 111 ŠC (max. height 1380 mm substances Cristal) Š PROVEDENÍ VERTIKÁLNÍ LÁTKY CRISTAL U VÝROBKU SCREEN ZIP A SCREEN ZIP ECONOMY OpTION Of THE vERTICAL fABRIC CRISTAL fOR pRODUCTS SCREEN ZIp AND SCREEN ZIp ECONOMy Š - WIDTH SCREEN - HEIGHT SCREEN ŠC - WIDTH CRISTAL...

  • Page 112: Measurement And Assembly

    Measurement Manual Measurement Manual The SCREEN ZIP roller blinds can be placed into an opening or in front of it, and attached to the ceiling or wall. The screen roller blind width and height shall be measured as follows: w ... width (mm) a) attachment into an opening: Measure the actual opening width in three points, indicate the lowest dimension measured in the order form.
  • Page 113 NOTE: Faulty assembly can lead to accidents. Observe instructions for the proper roller blind assembly to prevent the risk of separation of the roller blind from a wall or window. ISOTRA a. s. shall not be held responsible for defects caused by faulty assembly.
  • Page 114 SCREEN BLINDS SCREEN ZIP Assembly to ceiling Assembly to ceiling Mark the position of holes to be drilled, considering the following factors: - for upper boxes having the width of max. 4.0 m, two brackets are sufficient which must be installed in a distance of approximately 15–20 cm from each end;...
  • Page 115 SCREEN BLINDS SCREEN ZIP Assembly to wall Assembly to wall Mark the position of angle-section brackets and holes to be drilled. For upper boxes having the width of max. 1.5 m, two brackets are sufficient, which must be installed in a distance of approximately 15–20 cm from each end. For wider roller blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the second in a distance of...
  • Page 116 Only one type of guide bars is available – GC20. The ZIP guide bars consist of three parts: two aluminium rails and a plastic inner rail, in which the ZIP runs.
  • Page 117 Slide lower section (5) to the side so that the fabric leaves the lateral slot on one side. Then insert inner rail (6) to the fabric and squeeze in ZIP (7). 1. Squeeze the inner rail directly to the guide rail lateral slot where it will strai- ghten spontaneously.
  • Page 118 SCREEN BLINDS SCREEN ZIP Assembly of handle Assembly of exterior handle with sleeve passing through wall Handle – option with bushing (Ks) For exterior roller blinds installed with a sleeve passing through a wall and with a handle rod in the interior, it is necessary to calculate the exact position of the hole for a 30-cm angular rod (15).

  • Page 119: Screen Zip Economy

     absolute fabric tension, high wind resistance,  thermal regulation effect,  insect protection when closed,  cost-effective variant of the SCREEN ZIP  model, motor controls. ...

  • Page 120: Basic Product Specification

    ZP 0024/1 ZP 0018 A 67/12 ZP0097/0004 ZP 0023 A 67/12 SCREEN ZIP - ECONOMY 2-01048-XXXX-C Control Used for lifting and lowering of screen blinds. SCREEN ZIP - ECONOMY 2-01048-XXXX-E Motor - Optional control using the sun / wind sensor or by a remote control or switch.
  • Page 121 SCREEN BLINDS Screen ZIP Economy (2-010498-0000) position item name business name drawing number Rolled box, GOT 125 PR0025 6-001699-0000 Rolled box, bevel 20°, GUTS 125 PR0001 6-001701-0000 Side cap, 20° BKS 125 - pair PR0059 6-001755-0000 Under-plastering rail PS-V 20°...
  • Page 122 SCREEN BLINDS SCREEN ZIP ECONOMY Basic Product Specification Box visible option Under-plaster box Guide rail (PR0025 + PR0001) (PR0054 + PR0077 + PR0647) (6-008705) Cristal fabric is fringed by strip of STNZ fabric BOX PRO SCREEN ECO - ZAOMÍTACÍ 2-01038-XXXX-C...
  • Page 123 ŠC (max. height 1380 mm substances Cristal) Š PROVEDENÍ VERTIKÁLNÍ LÁTKY CRISTAL U VÝROBKU SCREEN ZIP A SCREEN ZIP ECONOMY OpTION Of THE vERTICAL fABRIC CRISTAL fOR pRODUCTS SCREEN ZIp AND SCREEN ZIp ECONOMy Š - WIDTH SCREEN - HEIGHT SCREEN ŠC - WIDTH CRISTAL...

  • Page 124: Measurement And Assembly

    Assembly 1. Measuring The SCREEN ZIP ECO blinds can be installed into an opening as well as in front of it, and attached to the wall. The screen roller blind width and height shall be measured as follows: W …… (width) a) assembly into an opening Measure the actual opening width in three points;...
  • Page 125 Direct guide bar installation of to a wall. ASSEMBLY OF BOX AND GUIDE BARS Insert the guide bar to the side board pin. No screws are necessary. When inserting, slide the ZIP to the guide socket. Connect guiding channels with box.
  • Page 126 SCREEN BLINDS Insert the fabric into the guiding channels. Put on the guiding channel cover. Fix the cover channel with screw. Check the functionality.

  • Page 127: Screen Gw

    SCREEN BLINDS SCREEN GW Simple, modern and stylish appearance,  screening of both the interior and the exterior  areas, side guidance by a cable or by a guide rail,  possibility of electirc control,  frame colour as per the RAL chart ...

  • Page 128: Basic Product Specification

    SCREEN BLINDS SCREEN GW Basic Product Specification A 700/12 XY 00017 ZP0052/1 MR 026/1 ZP0046 A 67/12 A 710/3 ZP0057/1 31, 32 ZP0031/1 ZP0030/1 MR 024/1 ZP0001 ZP0005 ZP0026 ZP0058 ZP0058/1 ZP0042 ZP0042/1 ZP0027/1 MR 035 A 700/3 ZP0090 ZP0019 A 710/1 ZP0020 ZP0056/1...
  • Page 129 SCREEN BLINDS SCREEN GW (2-01396-0000) position item name business name drawing number Bottom rail Al - FD 42 raw RR 08/6 6-009147-0000 Rounded weight steel ZP0018/1 3-02880-PU27 Black brush w.4.8 x h. 7mm ZP0005 6-009219-0000 Plastic rod 3,8 mm ZP0037 6-009163-0000 Al cover CT105 upper ZP0030...
  • Page 130 SCREEN BLINDS SCREEN GW Head Rail C 105 Head Rail CT 105 Head rail hanger (6-009232) Square L (7-302233) Bottom rail FZ 47 Winding roller Guide rail Bracket for steel wire (RR 08/6, 6-009147) (6-011084) (6-008727) (302431) Design variants...

  • Page 131: Measurement And Assembly

    SCREEN BLINDS SCREEN GW Measurement Manual Measurement Manual The SCREEN GW roller blinds can be placed into an opening or in front of it, and attached to the ceiling or wall. The screen roller blind width and height shall be measured as follows: W ……...
  • Page 132 NOTE: Faulty assembly can lead to accidents. Observe instructions for the proper roller blind installation to prevent the risk of separation of the roller blind from a wall or window. ISOTRA a. s. shall not be held responsible for defects caused by faul- ty assembly.
  • Page 133 SCREEN BLINDS SCREEN GW Assembly Assembly to ceiling Mark the position of holes to be drilled, considering the following factors: - for upper boxes having the width of max. 4.0 m, two brackets (6) are sufficient which must be installed in a distance of approximately 15–20 cm from each end;...
  • Page 134 SCREEN BLINDS SCREEN GW Assembly Assembly to wall Mark the position of angle-section brackets and holes to be drilled. For upper boxes having the width of max. 1.5 m, two brackets are sufficient, which must be installed in a distance of approximately 15–20 cm from each end. For wider roller blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the second in a distance of 20–60 cm from the first one.
  • Page 135 SCREEN BLINDS SCREEN GW Assembly Assembly of guide rails First, attach the box to the ceiling/wall, then install the guide rails. For model GW, only one type of guide rails is available – GC20. The bar is supplied with pre-drilled holes, as per order, from the front or from the side. Placement of holes: - outer holes are placed approx.
  • Page 136 SCREEN BLINDS SCREEN GW Assembly Assembly of cords in roller blinds with boxes Steel cords Ø 4 mm are supplied cut to length with a pre-pressed threaded end piece. The exact cord configuration may vary per specific projects. After attaching the upper box, pass the cord through the attachment roller on the side board and secure with a bolt.
  • Page 137 SCREEN BLINDS SCREEN GW Assembly Exterior assembly with sleeve passing through wall For exterior roller blinds installed with a sleeve passing through a wall and with a crank rod in the interior, it is necessary to calculate the exact position of the hole for a 30-cm angular rod (15). - Attach the brackets to a wall or ceiling and install the roller blind in its place.

  • Page 138: Screen Lite

    SCREEN BLINDS SCREEN LITE Light-weight variant without the cover moulding  cost-effective alternative to she SCREEN ZIP and  SCREEN GW models screening of boht the interior and the exterior areas  side guidance by a cable or by a guide rail ...

  • Page 139: Basic Product Specification

    SCREEN BLINDS SCREEN LITE Basic Product Specification ZP0046 MR 026/1 MR 024/1 MR 035 MOTOR ZP0059/1 KLIKA ZP0082 ZP0021/1 ZP0062 ZP0020 ZP0027/1 A 710/1 A 700/3 ZP0090 ZP0056/1 P 019/1 ZP0065 ZP0022 ZP0001 RR 08/6 ZP0018/1 ZP0037 ZP0049 2-01395-0000-A Control Used for lifting and lowering of screen blinds.
  • Page 140 SCREEN BLINDS SCREEN LITE (2-01395-0000) position item name business name drawing number Bottom rail Al - FD 42 raw RR 08/6 6-009147-0000 Rounded weight steel ZP0018/1 3-02880-PU27 Plastic rod 3,8 mm ZP0037 6-009163-0000 Winding roller for awnings dia. 78 mm - 6 m MR 024/1 6-011084-0078 Plastic bar PVC 6,0 mm...
  • Page 141 SCREEN BLINDS SCREEN LITE Technical Specification Rail Bracket for steel wire (2-01002) (3-02431) Bottom Rail FD 42 Winding roller Guide rail GC 20 (6-011084) (6-008727) (RR 08/6, 6-009147) Design variants...

  • Page 142: Measurement And Assembly

    NOTE: Faulty installation can lead to accidents. Observe instructions for the proper roller blind assembly to prevent the risk of separation of the roller blind from a wall or window. ISOTRA a. s. shall not be held responsible for defects caused by faulty...
  • Page 143 SCREEN BLINDS SCREEN LITE Assembly Roller blind assembly to ceiling or wall Start the screen roller blind assembly to the ceiling by marking out the atta- chment holes of the supporting brackets. The distance of the screws from the roller blind edge should be 30 mm.
  • Page 144 SCREEN BLINDS SCREEN LITE Assembly Assembly of cords in roller blinds without boxes Steel cords Ø 4 mm are supplied cut to length with a pre-pressed threaded end piece. The exact cord configuration may vary per specific projects. After attaching the upper box, pass the cord through the attachment roller on the side board and secure with a bolt.
  • Page 145 SCREEN BLINDS SCREEN LITE Assembly Exterior assembly with sleeve passing through wall For exterior roller blinds installed with a sleeve passing through a wall and with a crank rod in the interior, it is necessary to calculate the exact position of the hole for a 30-cm angular rod (15). - Attach the brackets to a wall or ceiling and install the roller blind in its place.

  • Page 146: Screen Zip, Zip Economy, Gw, Lite

    SCREEN BLINDS SCREEN ZIP, GW, LITE Control - Handle P 057/15 P 057/15 P 049 P 051/1/x P 057/15 P 057/15 P 055/1 1 0 0 1 0 0 P 049 P 055/1 P 055/1 P 055/1 P 054 P 054...
  • Page 147 P 521 P 053/1 P 057/13 P 057/15 P 522 P 052/1 Handle for SCREEN ZIP (2-00868-XXXX-B) Handle for SCREEN GW, LITE (2-00859-XXXXA) Handle for SCREEN ZIP (2-00868-XXXX-B) position item name business name drawing number Cranked handle Al – dia 12 mm grey...

  • Page 148: Control Motor

    SCREEN BLINDS SCREEN ZIP, ZIP ECONOMY, GW, LITE Control - Motor MOTORS-SCREEN 2-00530-XXXX-2 position item name business name drawing number Motor ALTUS 50 RTS 06/17 MR 091/06 6-011170-0006 Motor ALTUS 50 RTS 10/17 MR 091/10 6-011170-0010 Motor ALTUS 50 RTS 15/17...

  • Page 149: Screen Sky

    SCREEN BLINDS SCREEN SKY Effective protection from light and heat  radiation, protection against weather and outside noise,  full functionality in any position of the  casement, wide selection of fabrics with various levels of  light transmittance.

  • Page 150: Basic Product Specification

    Manual - Used for lifting and lowering of screen sky blinds. Specification Cover Profile Winding Roller Assembly The ISOTRA SCREEN SKY roof roller blind is Commercial Name LR 60 RR 15/1 installed by attaching the box to the flashing Dimension of the roof window upper frame.
  • Page 151 SCREEN BLINDS Screen Sky (2-01013-0000) position item name business name drawing number Profiles - SCREEN - SKY see Profiles 10/1 Screen cover - S LR 60 3-02443-0000 10/30 Al tube (D/N) Al - elox RR 08/41 6-011163-PU52 10/102 Spring, left l=600/1,3 LR 26/2 7-301254-0000 10/110...

  • Page 152: Measurement And Assembly

    SCREEN BLINDS SCREEN SKY 1. MEASUREMENT OF WINDOWS It is recommended to make the assessment from the exterior side of the roof window, and at the very plating. If the win- dow is fitted with a nameplate, then in the order form, to its notes, specify the exact name and type of the roof window to verify the accuracy of the measured values.
  • Page 153 SCREEN BLINDS 2. ASSEMBLY Take the assembly only according to this manual which will help you to avoid unnecessary assembly errors or other incon- veniences associated with them. TOOLS FOR ASSEMBLY: • CORDLESS DRILL • SCREWDRIVER PH 2 • KNIFE, SCISSORS, PLIERS Check: • Before assembly we recommend checking all parts of the delivered goods, which will eliminate potential pro- blems. Any short comings or comments concerning the assembly or custom blinds please advise to manufacturers. • Remo- ve all obstacles from the skylight, which could hinder the installation. ASSEMBLY:  Open the roof window into position so that the assembly from the exterior can be run out  If the window is equipped with a locking bolt at the attachment of the upper box blinds, remove these screws (If it is not...
  • Page 154 ISOTRA a.s. ISOTRA Partner Bílovecká 2411/1, 746 01 Opava Czech Republic Tel.: +420 553 685 111 E-mail: isotra@isotra.com www.isotra.com Released: 09/2021...

This manual is also suitable for:

GwLiteZip economyHr7Hrs-zip

Table of Contents