DIS DCS-6000 Installation Manual page 24

Danish Interpretation Systems
10 If you pressed 'Yes' you get the following
dialog box:
'Setting the connection for the MSDE
database'.
Two parameters have to be supplied to these
windows:
Computer name and default database name.
Computer name is the name of the computer
on which the database engine is running.
Default database name is the name of (one of)
the database(s) you've selected previously.
After filling in the computer name and default
database name, press 'Create default
ConnectionString' button to generate the
ConnectionString' according to the parameters
provided.
The resulting ConnectionString' will be
displayed in a textbox at the bottom of the
window.
11 Press 'Test connection' button to check the
validity of the newly created ConnectionString.
If the database can be successfully connected
with this ConnectionString, a confirmation
window with the message 'Connection
succeeded.' will appear.
Click OK
12 Click 'Save ConnectionString' button to save
the ConnectionString.
Click 'Next' to continue.
13 If you have selected 'Create Hall definitions'
previously, the 'Hall Definitions' window will
appear.
Details on how to setup hall definitions are
present in the 'Creating Multiple Halls
Definitions' section.
Please consult the section 'Creating Multiple
24
Manual 01 19 60011
Installation Manual