Introduction; Minimum Requirement - DIS DCS-6000 Installation Manual

Danish Interpretation Systems

Introduction

This manual describes how to design a DCS 6000 Conference system using the SW 6000 Software Packages,
how to install the SW 6000 Software Packages and how to setup the system for running the first time.
This document does however not describe the use of the CUA and CAA applications in detail. Please consult
the relevant manuals for this.
The manual does also give detailed descriptions of the more technical parts of SW 6000 Software Package
installation. These include:
1. How to find the computer name of a computer.
2. Supported databases.
3. A description of the connect string.
4. Installing Microsoft Message Queuing.
5. Installing Service Packs.
Important:
The system has to be designed, as the SW 6000 Software Package gives options for all in-between a small
installation with one PC and a large installation with more than 1000 PC's.
So before installing any applications, please consult the Section: "System design"

Minimum requirement

The minimum requirements for a PC running an application are:
Min. Pentium 1.8G
Min. 256 Mb Ram
10GB HD
CD-Rom drive
RS232 port (on the PC running the CUI application)
USB port if CP 6000 Chip Card Programmer is to be used
T-base 10 network card
VGA screen, min. resolution 1024x768.
The CUA is designed for a resolution of 1024x768. If the VGA screen has a resolution higher than
this, that CUA application will run in a window.
Manual 01 19 60011
Installation Manual
5