Table of Contents
Advertisement
S88-3
tams elektronik
2. Operation overview
The S88-3 feedback module is compatible with all components that work with the s88 bus
developed by the Märklin** company. It can read in 16 ground contacts.
The S88-3 feedback module is optimised for use in centre conductor systems.
2.1. Sending the feedback in the s88-bus
The information is transmitted from the S88-3 via the s88-bus to the upstream feedback
module or to the connected digital device (interface, memory or central unit). The data
transmission from one feedback module to the other takes place in the s88 bus according to
the bucket-chain-memory principle.
The number of feedback devices you can connect to a bus line depends on the interface,
memory or central unit you use. Please observe the specifications of the device manufacturer.
Addressing the feedback modules
The addressing of the S88-3 feedback module is done automatically according to its position
in the bus line. It is therefore used in linear bus lines with direct connection to the interface,
memory or central unit.
6 | Operation overview
Advertisement
Table of Contents
