The assignment of commercial Ethernet patch-cables for use in s88 feedback systems has been regulated in the standard s88-N. The adapters S88-A correspond to this standard. Versions of the adapters S88-A...
Page 4
English S88-A Connection socket or plug? Devices for the s88 bus (feed back modules, central unit, etc.) have 6- pin connecting plugs. If there is space available and if the adapter can be securely mounted, it makes sense to use adapters with sockets. With some devices it is impossible securely mounting an adapter with socket.
S88-A English Explanations for the examples: 1 The central unit shown does not allow connecting an adapter with socket. That is the reason why the connection is made via a short 6-connector connecting cable and an adapter with plug. As the central unit´s connection shows in direction of the following module, an adapter version "L"...
English S88-A 3. Check list for trouble shooting The central unit / the memory / the interface do not show the proper status. Possible cause: The connection(s) between the adapter and the connected device and / or the patch cable have been interrupted. à...
Page 7
Actuele informatie en tips: http://www.tams-online.de Garantie und Service: Warranty and service: Garantie et service: Garantie en service: Tams Elektronik GmbH Rupsteinstraße 10 D-30625 Hannover fon: +49 (0)511 / 55 60 60 fax: +49 (0)511 / 55 61 61 e-mail: modellbahn@tams-online.de...