Wireless-G PrintServer with Multifunction Printer Support
10. If your network uses a router that automatically assigns IP addresses, select Automatically obtain an IP
address (DHCP). If your network uses a static IP address, select Set IP configuration manually, and enter
the IP Address, Subnet Mask, and Gateway in the fields provided.
Click Next.
Chapter 3: Installing the PrintServer Using the Setup Wizard
Installation
Figure 3-9: Configure IP Settings (Automatic)
Figure 3-10: Configure IP Settings (Static IP)
ip (internet protocol): a protocol
used to send data over a network
ip address: the address used to identify
a computer or device on a network
static ip address: a fixed address assigned to
a computer or device connected to a network.
10