Wireless-G PrintServer with Multifunction Printer Support
Chapter 6: Using the Web-based Utility
Overview
After setting up the PrintServer with the Setup Wizard, the PrintServer will be ready for use. However, if you'd like
to change its advanced settings, use the PrintServer's web-based utility. This chapter will describe each web
page of the utility and each page's key functions. The utility can be accessed via your web browser through a
networked computer.
There are six main tabs: Setup, Protocol, Wireless, Printer, Status, and Exit. Additional tabs will be available after
you click one of the main tabs, except for the Setup and Exit tabs.
To access the web-based utility, launch the web browser of your computer, and enter the PrintServer's IP address
in the Address field. Then press Enter.
NOTE: Double-click the PrintServer diagnostic icon. The IP address of the PrintServer will be
displayed on the PrintServer Info screen.
On the login screen, leave the User name field blank, and enter the password you set when you ran the Setup
Wizard (the default password is admin). Click the OK button.
Chapter 5: Using the Web-based Utility
Overview
Figure 6-1: Login
24