Figure 3-18: Disconnect The Power Adapter; Figure 3-19: Disconnect The Network Cable - Linksys WPSM54G User Manual

Wireless-G PrintServer with Multifunction Printer Support
16. Wait a few moments while the PrintServer's settings are updated.
In the next few screens, you will disconnect and reconnect the PrintServer. Proceed in the order specified to
avoid any networking conflicts.
Disconnect the power adapter from the PrintServer. Click Next.
17. Disconnect the Ethernet network cable from the PrintServer and router. Click Next.
Chapter 3: Installing the PrintServer Using the Setup Wizard
Installation

Figure 3-18: Disconnect the Power Adapter

Figure 3-19: Disconnect the Network Cable

14