Figure 4-9: Password; Figure 4-10: Configure Ip Settings - Linksys WPSM54G V1.1 User Manual

Wireless-G PrintServer with Multifunction Printer Support
10. If you have changed the default password previously, the password dialog opens and you are prompted for
your password. Otherwise, the installation will continue.
If you have forgotten your password, hold the reset button on the side of the PrintServer for 10 seconds. This
will reset the device to factory default. The default password is admin.
11. The Configure IP Settings screen appears. If your network uses a router with a DHCP setting that
automatically assigns IP addresses, select Automatically obtain an IP address (DHCP). If your network
uses a static IP address, select Set IP configuration manually, and enter the IP Address, Subnet Mask, and
Gateway in the fields provided.
Click Next to continue, or click Back to return to the previous screen.
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation

Figure 4-9: Password

Figure 4-10: Configure IP Settings

ip (internet protocol): a protocol
used to send data over a network
ip address: the address used to identify
a computer or device on a network
static ip address: a fixed address assigned to
a computer or device connected to a network.
12