Parameter Setting - Sungrow SH5 0RT Series User Manual

User Manual
Select Customized Charging to enter the Add Preset Condition interface, drag to set the
charging start time and end time, input Current and Charging Power, and tap Save. It will
jump to the customized charging interface. TapSave again to finish setting.
• The minimum unit of charging time is 10 minutes.
• The current is the maximum allowable current of the charger to charge the on-board
system, and the charging power is the maximum allowable charging power of the
charger to charge the on-board system. The current and the corresponding charging
power can be set as follows:
Current
(A)
Power
(kW)
• In this mode, the charger starts charging automatically at the set charging time.
• If the moment is within the set charging time and the charging cable has been
inserted into the EV, click "Save" on the charging mode interface and the
charger will immediately start charging the EV.

8.11.3 Parameter Setting

Tap Settings to enter the corresponding interface.
figure 8-23 Customized Charging
6 8
4.14 5.52
10 12
6.9 8.28
8 iSolarCloud App
14 16
9.66 11
109