Table of Contents
Advertisement
Hardware Installation
Installation and initialization of ConnectX-6 Dx adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.
Safety Warnings
Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the
Please observe all safety warnings to avoid injury and prevent damage to system components.
Unable to render include or excerpt-include. Could not retrieve page.
Installation Procedure Overview
The installation procedure of ConnectX-6 Dx adapter cards involves the following steps:
Step
1
Check the system's hardware and software
requirements.
2
Pay attention to the airflow consideration within
the host system
3
Follow the safety precautions
4
Unpack the package
5
Follow the pre-installation checklist
6
(Optional) Replace the full-height mounting
bracket with the supplied short bracket
7
Install the ConnectX-6 Dx card in the system
8
Connect cables or modules to the card
9
Identify ConnectX-6 Dx in the system
Adapter Installation Safety
Procedure
Instructions.
Direct Link
Refer to
System Requirements
Refer to
Airflow Requirements
Refer to
Safety Precautions
Refer to
Unpack the package
Refer to
Pre-Installation Checklist
Refer to
Bracket Replacement
Instructions
Refer to
Installation Instructions
Refer to
Cables and Modules
Refer to
Identifying Your Card
22
Advertisement
Table of Contents
Troubleshooting
