Networking Ports Leds Interface; Scheme 1: One Bi-Color Led - Nvidia MCX621102AC-ADAT User Manual

Networking Ports LEDs Interface

For the networking ports LEDs description, follow the below table depending on the OPN you have
purchased.
MCX621102A[C/N/E]-ADAT, MCX621202A(C/S)-ADAT
MCX623102A[C/N]-ADAT, MCX623102A[C/N]-
GDAT, MCX623102A[S/E/N/C]-GDAT
MCX623105A[N/E]-CDAT, MCX623106A[C/N/S/E]-
CDAT, MCX623106P[C/N/E]-CDAT,
MCX623105A[C/N/S/E]-VDAT

Scheme 1: One Bi-Color LED

There is one bicolor (Yellow and Green) I/O LED per port to indicate speed and link status.
Link Indications
State
Beacon command for locating the adapter card
Error
Physical Activity
Link Up
OPN
Scheme 1: One Bi-Color LED
Scheme 2: One Bi-Color LED and one Single Color
LED
Bi-Color LED (Yellow/Green)
Physical link speed
1Hz blinking Yellow
4Hz blinking Yellow Indicates an error with the link. The
error can be one of the following:
Error Type Description
2
I C access to the
2
I C networking ports
fails
Over-current
Over-current condition of the
networking ports
The Green LED will blink.
The Green LED will be solid.
LEDs Scheme
LED Behavior
Blinks until error
is fixed
Blinks until error
is fixed
19