Table of Contents
Advertisement
•
Verify that the system is powered off and is unplugged.
•
It is strongly recommended to use an ESD strap or other antistatic devices.
Unpacking the Package
Check against the package contents list that all the parts have been sent. Check the parts for visible
damage that may have occurred during shipping. Please note that the cards must be placed on an
antistatic surface.
Category
Cards
Accessories
Please note that if the card is removed hastily from the antistatic bag, the plastic ziplock
may harm the EMI fingers on the networking connector. Carefully remove the card from the
antistatic bag to avoid damaging the EMI fingers.
Pre-Installation Checklist
1.
Verify that your system meets the hardware and software requirements stated above.
2.
Shut down your system if active.
Turn off the power to the system, and disconnect the power cord. Refer to the system
documentation for instructions.
Qty.
1
ConnectX-6 Dx adapter card
1
Adapter card short bracket
1
Adapter card tall bracket (shipped assembled on
the card)
Item
24
Advertisement
Table of Contents
Troubleshooting
