Table of Contents
Advertisement
"Request for unknown module key 'Mellanox Technologies signing key:
61feb074fc7292f958419386ffdd9d5ca999e403' err -11"
However, please note that a similar message as the following will still be presented:
"my_module: module verification failed: signature and/or required key missing - tainting kernel"
This message is only presented once, upon first module boot that either has no signature or
whose key is not in the kernel key ring. Therefore, this message may go unnoticed. Once the
system is rebooted after unloading and reloading a kernel module, the message will appear.
(Note that this message cannot be eliminated.)
2.
Update the initramfs on RHEL systems with the stripped modules.
mkinitrd /boot/initramfs-$(uname -r).img $(uname -r) --force
Performance Tuning
Depending on the application of the user's system, it may be necessary to modify the default
configuration of network adapters based on the ConnectX® adapters. In case that tuning is required,
please refer to
the Performance Tuning Guide for NVIDIA Network
Windows Driver Installation
For Windows, download and install the latest WinOF-2 for Windows software package available via
the NVIDIA website at:
Drivers > Learn More > NVIDIA WinOF-2. Follow the installation instructions included in the download
package (also available from the download page).
The snapshots in the following sections are presented for illustration purposes only. The
installation interface may slightly vary, depending on the operating system in use.
Software Requirements
Description
Windows Server 2022
Windows Server 2019
Windows Server 2016
Windows Server 2012 R2
Windows 11 Client (64 bit only)
Windows 10 Client (64 bit only)
Windows 8.1 Client (64 bit only)
https://www.nvidia.com/en-us/networking/products/software/
Adapters.
MLNX_WinOF2-<version>_All_x64.exe
> InfiniBand
Package
44
Advertisement
Table of Contents
Troubleshooting
