Table of Contents
Advertisement
Note: The Operating System listed above must run with administrator privileges.
Downloading WinOF-2 Driver
To download the .exe file according to your Operating System, please follow the steps below:
1.
Obtain the machine architecture.
a.
To go to the Start menu, position your mouse in the bottom-right corner of the Remote
Desktop of your screen.
b.
Open a CMD console (Click Task Manager-->File --> Run new task and enter CMD).
c.
Enter the following command.
echo %PROCESSOR_ARCHITECTURE%
On an x64 (64-bit) machine, the output will be "AMD64".
2.
Go to the WinOF-2 web page at:
https://www.nvidia.com/en-us/networking/products/software/
WinOF-2
3.
Download the .exe image according to the architecture of your machine
The name of the .exe is in the following format: MLNX_WinOF2-<version>_<arch>.exe.
Installing the incorrect .exe file is prohibited. If you do so, an error message will be
displayed.
For example, if you install a 64-bit .exe on a 32-bit machine, the wizard will display
the following (or a similar) error message: "The installation package is not supported
by this processor type. Contact your vendor"
Installing WinOF-2 Driver
The snapshots in the following sections are for illustration purposes only. The installation
interface may slightly vary, depending on the used operating system.
This section provides instructions for two types of installation procedures, and both require
administrator privileges:
•
Attended
Installation - An installation procedure that requires frequent user intervention.
•
Unattended
Installation - An automated installation procedure that requires no user
intervention.
Both Attended and Unattended installations require administrator privileges.
Attended Installation
The following is an example of an installation session.
InfiniBand Drivers → NVIDIA
(see Step
1).
45
Advertisement
Table of Contents
Troubleshooting
