Table of Contents
Advertisement
UNIFLAME User's Manual
1.2 APPLICATION
The InfraRed Model (P/N 401111-01) contains an infrared flame sensor, responding to wavelengths in
the infrared range from 700 nm to 1700 nm. This sensor is best suited for all oil and coal fired
applications.
The UltraViolet Model (P/N 401112-01) contains an ultraviolet flame sensor, responding to wavelengths
in the ultraviolet range from 295 nm to 335 nm. This sensor is best suited for gas and light oil
applications.
The MultiSpectral Model (P/N 401113-01) contains an infrared sensor as well as an ultraviolet sensor.
Each respective sensor responds to wavelengths in the infrared range from 700 nm to 1700 nm and to
wavelengths in the ultraviolet range from 295 nm to 335 nm.
Swivel
Valve & Wye
P/N 91016-63
P/N 354943-01
Front Mount
- - OR - -
Fiber Optic
Inner & Outer
Carrier Assembly
1.3 ACCESSORIES
Description
12 Cond. Detector cable with factory installed female connector
Wiring harness assembly
10 Cond. Detector cable
Swivel Mount
Valve and Wye Assembly
Power Supply (100VA)
Forney Corporation
Mounting flange
P/N 91147-23
Uniflame Detector
IR Model P/N 401111-01
UV Model P/N 401112-01
IR/UV Model P/N 401113-01 (fiber optic not available)
DPD & UniFlame
Software, Windows based
P/N 404000-01
Figure 1 – Application Drawing
Prefab cable 12 conductor
10' P/N 405842-01
20' P/N 405842-02
40' P/N 405842-04
RS 485/232
Converter
P/N 78195-84
2
Publication 372000-48 Rev H
Wiring harness 12 conductor
- - OR - -
To BMS & 24VDC
Power Supply
Belden Communication
Wire
To Next
P/N 76097-00
Detector
Part Number
405842-XX
401110-XX
91042-59
91016-63
352750-01
79508-51
10' P/N 401110-02
20' P/N 401110-04
30' P/N 401110-05
Advertisement
Table of Contents
