Table of Contents
Advertisement
1
3. In a case where the OB DIGITAL Assy is replaced with one for servicing because of a defective EEPROM on the original Assy and
manual adjustments are to be performed
(In a case where no data are stored in the OB DIGITAL Assy or as backup, and the values that have been manually adjusted on Service
A
Menu are to be applied as adjustment data for the panel unit)
Command: "UAJ" (Effective during FAY)
Factory Menu
PANEL INFORMATION
B
BACKUP DATA: NO OPRT
DIGITAL EEPROM: NO OPRT
DIGITAL EEPROM: REPAIR
[set] (Press and hold for 5 seconds.)
C
• If the OB DIGITAL Assy with which adjustment data for the panel unit have been copied is mounted,
the above procedures are not necessary after manual adjustment.
(The indication "DIGITAL EEPROM: REPAIR" will not be displayed.)
D
E
F
112
1
2
∞ (down)
• • •
∞ (down)
ETC. (+)
[set]
∞ (down)
>> (right)
PDP-436SXE
2
3
3
4
4
Advertisement
Table of Contents
