2.
INSTALLATION INSTRUCTIONS
2.1
Door Panel Components
For new installations, the door panel components shown in Table 2-1 are pre-assembled and wired in the
2.1.1
Figure 1 illustrates the 4-Contact Block Assembly.
© 2012, THE STANLEY WORKS. ALL RIGHTS RESERVED.
NOTE:
factory.
Table 2-1. Door Panel Components
Part Name
2-Contact Block Assembly
2-Contact Plate Assembly
4-Contact Block Assembly
Recessed Panic Pushbar with Switch
Detent Block for Delayed Egress
Shear Magnet Locks
Figure 1. The 4-Contact Block Assembly
RED WIRE
CONTACT
GREEN WIRE
CONTACT
BOTTOM VIEW
CABLE TIE
DE005
204038
Rev. C, 01/17/12
3 of 19