Table of Contents
Advertisement
102 Infotainment Bolero ›
The Wi-Fi signal from the hotspot is not available
Functionality
The Wi-Fi can be used for the internet connection or
for the SmartLinkConnection.
The Infotainment hotspot can connect up to 8 mo-
bile devices. At the same time, the Infotainment can
be connected to another hotspot.
›
To display the list of connected mobile devices, tap
Wi-Fi Infotainment system as hotspot Connected devi-
ces.
Settings
Connect a mobile device to the Infotainment hot-
spot
›
Turn on the Infotainment's Wi-Fi hotspot in the
menu item
Wi-Fi Infotainment system as hotspot
Use as hotspot.
›
Turn on the Wi-Fi on the mobile device.
›
In the list of available Wi-Fi devices, look for Info-
tainment Wi-Fi.
The name of the Infotainment is taken from the
menu item
Wi-Fi Infotainment system as hotspot
Network name:.
›
Select the Infotainment hotspot and enter the re-
quired password.
The password for connecting to the Infotainment
hotspot is taken from the menu item
Fi Infotainment system as hotspot Network key.
›
Confirm the connection.
Connect Infotainment to the mobile device hot-
spot
›
Turn on the Infotainment's Wi-Fi unit in the menu
item
Wi-Fi Wi-Fi: Turn on Wi-Fi on.
›
Select the desired hotspot in the list of available
hotspots.
›
Enter the password for connecting to mobile devi-
ces.
Infotainment stores passwords for previously
connected hotspots.
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
changed.
Activate/deactivate data transfer between the In-
fotainment and the connected device
›
To turn data transmission on or off, tap
Wi-Fi Infotainment system as hotspot Connected devices
Change the name of the Infotainment hotspot
Tap
Wi-Fi Infotainment system as hotspot Network
▶
name:.
Wi-Fi
Wi-
.
Enter the name and confirm.
▶
Change password for connection to Infotainment
hotspot
The password must be a minimum of 12 and a maxi-
mum of 63 characters.
Wi-Fi Infotainment system as a hotspot Network key .
▶
Enter and confirm the password.
▶
Quick connection of Infotainment to the mobile
device hotspot
›
On the mobile device, turn on the hotspot, its visi-
bility, and the option for WPS connection.
›
Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button).
Automatic WPS connection
›
Tap
Wi-Fi Quick connection to Infotainment system.
›
In the mobile device, switch on the option for con-
nection via WPS.
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Manual WPS connection
›
In the mobile device, switch on the option for con-
nection via WPS PIN.
The mobile device display will show the WPS PIN
for connecting to the Infotainment.
›
Tap
Wi-Fi Quick connection to Infotainment system
WPS PIN.
›
Enter the WPS PIN in the Infotainment and con-
firm.
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Automatic connection using the QR code
›
Tap
Wi-Fi Quick connection to Infotainment system.
›
In the mobile device, switch on the option for con-
nection via QR Code.
›
With the mobile device, read the QR code dis-
played on the Infotainment screen.
›
Wait for the connection to be established and, if
necessary, confirm the respective messages.
Tips for a perfect connection
Keep only the hotspot to be connected switched
▶
on and switch off the other hotspots.
Delete unused hotspots. This shortens the time re-
▶
quired to establish a connection.
For some hotspots, the connection takes longer, so
▶
wait for the connection to finish.
If the connection is interrupted, recheck the availa-
▶
ble hotspots and repeat the connection.
Functional restriction
The Infotainment system can only be connected to a
hotspot with WPA2 access protection.
Advertisement
Table of Contents
