Table of Contents
Advertisement
▶
Last distance selected Switching on/off the last distance
range selected
▶
Distance: - Setting the distance to vehicles in front
Troubleshooting
ACC not available
illuminates together with
or
illuminates together with
›
Stop the engine and start again.
›
If ACC is still unavailable, check the brake lights on
the vehicle or on the attached trailer.
›
Replace the defective bulb.
›
If the brake lights are working and ACC is still un-
available, seek the help of a specialist garage.
Lane Assist
Usage
Lane Assist helps to keep the vehicle in the lane. It is
based on the boundaries of a lane. These can include
boundary lines, road edges or objects such as curbs
and possibly traffic cones.
The system is intended primarily for use on high-
ways.
Functionality
As the vehicle approaches a lane marking, the sys-
tem executes a steering movement in the opposite
direction from the lane marking. The steering inter-
vention can be overridden manually.
No system intervention occurs when changing lane
with the turn signal on.
Status display in the instrument cluster display
lights up - System is activated and ready to
intervene
lights up - System is activated and ready to
intervene
lights up - System intervenes
lights up - System intervenes
Display
Display example in the black and white display.
Driver assist systems ›
Warning through steering wheel vibrations
The steering wheel vibrations are triggered in the
following situations.
The vehicle crosses the boundary line without the
▶
flashing light switched on.
The system is unable to keep the vehicle in the
▶
lane.
›
Correct the steering movement in the event of vi-
brations.
Functional conditions
✓ The driving speed is higher than 65 km/h.
✓ The lane markings are clearly visible.
Functional restriction
The system function may be restricted in the follow-
ing cases.
The field of view of the sensor is limited by a dirty
▶
screen or an obstacle or a preceding vehicle.
In the event of unfavourable weather conditions.
▶
When driving through a sharp bend.
▶
When driving on a steep road or in ruts.
▶
When the driving lane is too narrow.
▶
When driving through construction sites.
▶
WARNING
Risk of incorrect steering intervention!
Certain objects or markings on the roadway can be
incorrectly recognized as boundary lines.
Always keep your hands on the steering wheel and
▶
be prepared to override the steering intervention.
Settings
Activation / deactivation in the instrument cluster
›
Press
the button on the multifunction steering
wheel.
›
Select Lane Assist .
Setting in Infotainment
In the menu:
Lane Assist
183
Lane limitation highligh-
ted on the right: system
intervenes on the right
when approaching the
lane marking.
The lines are highlighted
in colour on the coloured
display.
Advertisement
Table of Contents
