Table of Contents
Advertisement
190 Park Assist systems ›
✓ The driving speed is lower than 15 km/h.
Operation
Switching on
›
Engage reverse gear.
Switching off
›
Disengage reverse gear.
Restriction
The camera image is distorted in contrast to the nak-
ed eye. The display may only be used to estimate the
distance.
Some items may not be displayed properly on the
screen. These include narrow columns, wire mesh
fences, grids or road bumps.
Area View environment overview
Usage
The area view assists the driver in parking and ma-
noeuvring by displaying the vehicle area.
Overview
General overview
3D views:
A
Top view
View obliquely from above
View from the side
General overview
By moving your finger across the screen, you can
change the viewing angle.
Area View environment overview
Camera rear view
Mode for transverse parking
A
Mode for parallel parking
B
Mode for driving up to a trailer/distance moni-
C
toring
Mode for monitoring the area behind the vehicle
D
(wide view)
The lines indicate the track, which is controlled at
the current steering angle. The distance between the
side lines corresponds approximately to the vehicle
width including mirrors.
Mode for transverse parking
Mode for parallel parking
›
In the screen, select the mode for parallel parking.
›
Turn on the indicator light for the side on which
you want to park.
mended direction
until the red colour of the tra-
B
pezoidal border
turns green.
C
›
Stop the vehicle in
front of a suitable
parking space.
›
Reverse so that the
yellow lines lead into
the parking space.
›
At the latest, stop
when the red line
touches the rear boun-
dary (e.g. curb).
›
Stop the vehicle stop
so that there are no
obstructions in the gap
between the auxiliary
boxes
and the rear
A
box does not extend
over the side of the
parking space (e.g.
kerb).
›
Turn the steering
wheel in the recom-
Advertisement
Table of Contents
