Connect The Device - Crestron Control System 3 Series Quick Start Manual

CP3 and CP3N
3-Series Control System® Automated Processors

Connect the Device

Connect the control system as called out in the following illustration.
Connect power last.
When connecting the control system:
Use Crestron power supplies for Crestron equipment.
l
The control system can be powered with the included 24 VDC power
l
pack or via Cresnet® network power via the NET 4-pin terminal block
port.
Connect the chassis ground lug to a known earth ground (for example,
l
building steel) to ensure the control system is properly grounded.
Quick Start
3