Crestron Control System 3 Series Quick Start Manual page 6

CP3 and CP3N
3-Series Control System® Automated Processors
Pair the Device with Apple® HomeKit®
Technology
The control system can be paired with an Apple® HomeKit® system, to
enable a TSR-310 handheld touch screen remote to control Apple TV®
devices via a control system program.
NOTES:
The control system, the Apple TV device(s), the TSR-310, and the
l
iOS® device used for setup must all be connected to the same
network.
The 3-Series control system must be registered to a MyCrestron
l
account prior to pairing it with Apple HomeKit. To register the
device, visit https://portal.my.crestron.com, select Add Device
from the Devices tab, and then follow the provided instructions.
The 3-Series control system must be connected to the Internet and
l
must have DNS (Domain Name System) enabled.
To enable the Apple HomeKit functionality on the control system:
1. Open Crestron Toolbox and establish a connection to the control
system.
2. Enable SSL by using the SSL Management function or by issuing the
ssl command in the Text Console tool. for more information refer to
the embedded Crestron Toolbox help files and the 3-Series Control
System Reference Guide (Doc. 7150) at www.crestron.com/manuals.
3. Navigate to the control system Setup page as described in
the Device.
4. Click Apple HomeKit. The Apple HomeKit page is displayed.
5. Click Enable to enable the HomeKit feature on the control system.
6. Click OK to reboot the control system after a reboot confirmation
message is displayed.
7. Return to the main Setup page. A unique eight-digit code is now shown
in the HK Setup Code field.
8. Record the unique eight-digit HomeKit code that is shown next to HK
Setup Code.
For further programming and pairing instructions, refer to the Pairing a
3-Series Control System with Apple HomeKit Technology Programming
Configure
Guide (Doc. 8495) at www.crestron.com/manuals.
Quick Start
6