MSI MS-6189 Manual page 59

Table of Contents

CHAPTER 3

Reset Configuration Data

Normally, you leave this field to Disabled. Select Enabled to reset

Extended System Configuration Data (ESCD) when you exit Setup if you

have installed a new add-on and the system reconfiguration has caused such

a serious conflict that the operating system can not boot.

The settings are: Enabled and Disabled .

Resources Controlled By

The Award Plug and Play BIOS has the capacity to automatically

configure all of the boot and Plug and Play compatible devices. However,

this capability means absolutely nothing unless you are using a Plug and

Play operating system such as Windows

"manual" choose specific resources by going into each of the sub menu that

follows this field (a sub menu is preceded by a """). The settings are:

Auto(ESCD), Manual.

IRQ Resources

When resources are controlled manually, assign each system inter-

rupt a type, depending on the type of device using the interrupt.

PCI/VGA Palette Snoop

Leave this field at Disabled. The settings are Enabled, Disabled.

AWARD



95/98. If you set this field to

3-28

BIOS SETUP

Table of Contents