MSI MS-6189 Manual page 8

CHAPTER 2 CHAPTER 2 CHAPTER 2 CHAPTER 2 CHAPTER 2
2.2 Clear CMOS Jumper: JBA 2.2 Clear CMOS Jumper: JBA
2.2 Clear CMOS Jumper: JBA 2.2 Clear CMOS Jumper: JBA 2.2 Clear CMOS Jumper: JBAT1
A battery must be used to retain the mainboard configuration in CMOS
RAM. Short 1-2 pins of JBAT1 to store the CMOS data.
Clear Data
Note: You can clear CMOS by shorting 1-2 pin, while the system is off.
Then, return to 2-3 pin position. Avoid clearing the CMOS while
the system is on, it will damage the mainboard. Always unplug
the power cord from the wall socket.
1
2
3
2-4
HARD HARDW W W W W ARE INST HARD HARD HARD ARE INST ARE INST ARE INSTALLA ARE INST
T1 T1
T1 T1
1
3
JBAT1
1
2
3
Keep Data
ALLATION ALLA ALLA ALLA TION TION TION TION