Siemens SIMADYN D FM 458 User Manual page 46

5 1
9 6
Table 2-20
Parameterizing The "COM PROFIBUS" program is required to use the FM 458
application module with the communications expansion module EXM 448
as master. It runs on a PC under Windows and generates a COM
database.
The generated database can also be loaded via
• PROFIBUS (with PC PROFIBUS card CP5411, CP5511 card)
• COM1/2 interface of the PC and RS-232 parameterizing/diagnostics
COM PROFIBUS must be additionally ordered, if EXM 448 is to be
configured as master.
The "SS52 load" driver program is included in COM PROFIBUS from
V3.1, or it can be requested at no charge via the Siemens Intranet under
the following address:
ftp://www.erlf80.asi.siemens.de/ SIMADYN_D/html/treiber.htm
Application Module FM 458 - User Manual
6DD1904-0AE0 Edition 12.2001
Pin Designation Explanation
RS 232: ground for "SS52load"
1
2 RS 232: TxD for "SS52load": Receive signal
RS 485: +TxRx PROFIBUS: Receive- and send signal +
3
(corresponds to data B)
RTS Request to send
4
(for OLM control; "1" when sending; as for pin 9)
5 M5EXT External ground; to supply OLMs
P5EXT P5 external; to supply OLMs
6
7 RS 232: RxD for "SS52load": Send signal
RS 485: -Tx/Rx PROFIBUS: receive- and send signal -
8
(corresponds to data A)
RTS Request to send
9
(for OLM control; "1" when sending; as for pin 4)
Connection assignment of X1 (RS232 and RS485)
or
interface with the "SS52load" driver program in the EXM 448.
Designation
COM PROFIBUS
Product description
Order No.
6ES5 895-6SE12 (German)
2
2-35