Installation
Installing the transducer
µPAP is designed for easy installation onboard ships and other surface units.
Prerequisites
Caution
The cabling must be done before installing the transducer.
Context
The transducer is mounted on the ship's arrangement for the transducer. This may be on
a pole lowered through a moon pool or a hull unit.
The location of the transducer arrangement must be as far away as possible from
thrusters, aerated water, noise sources or other equipment sensitive to acoustic noise in
the water.
Installing the transducer to the ship's side pole, page 49
Procedure
1
Remove the lifting handles.
15
393483/H