Table of Contents
Advertisement
EM 2040P Installation manual
Installing the transducer
Topics
Rules for transducer handling, page 32
Installation summary, page 34
Installation requirements, page 36
Installation principles, page 37
Reference point on the EM 2040P transducer, page 40
Painting the transducer face, page 41
Approved anti-fouling paints, page 43
Rules for transducer handling
To secure long life and accurate results, the transducer must be handled correctly.
A transducer must always be handled as a delicate item. Wrongful actions may damage
the transducer beyond repair. Observe these transducer handling rules:
1
Do not activate the transducer when it is out of the water.
2
Do not handle the transducer roughly, avoid impacts.
3
Do not expose the transducer to direct sunlight or excessive heat.
4
Do not use high pressure water, sand blasting, metal tools or strong solvents to
clean the transducer face.
5
Do not damage the outer protective skin on the transducer face.
6
Do not lift the transducer by the cable.
7
Do not step on the transducer cable.
8
Do not damage the transducer cable, avoid sharp objects.
32
417418/B
Hide quick links:
Advertisement
Table of Contents
