Table of Contents
Advertisement
installation
Non-Combustible Requirements
* Installation of the Receiver must be completed before installing non-combustible facing.
All three pieces (top, 2 sides) are supplied to meet the non combustible requirements.
Calcium silicate board is a high - grade material with
cement, quartz, natural and selected minerals as the main
raw materials. It is widely used for partitions and ceilings in
buildings. It is fire proof and earthquake proof.
If finishing the wall above the unit with materials such as tile,
brick, marble, etc. non-combustible board available from the
building supply store can be used.
Note: Calcium Silicate is 1/2' thick
Non-Combustible Facing Installation
Caution:
The non-combustible board supplied with this unit can
be damaged if dropped or struck. Handle with care.
1. Using drywall screws - secure non combustible material around unit, framing
and top nailing strip every 6 inches.
Important Note: To avoid cracking the board - pre-drill holes prior to securing to
unit/ framing.
2. Wipe any debris/dust from the non combustible material and drywall.
3. Prior to securing it is mandatory to prime the facing and edges using a quality
primer. This will ensure proper adhesion of both the tape and mud. The
supplied board is very porous.
Failure to follow this procedure will result in cracked seams.
4. Tape the seams using a mesh type tape.
5. Mud seams as normal. We recommend using a product called Durabond high
strength compound - for the first coat. This product can be found at any
hardware store. Mud must be cured as per manufacturer's recommendations.
6. Prime wall for a second time for proper adhesion of paint
7. Paint walls using a high quality paint which will withstand the high temperatures
being emitted from this appliance.
|
22
Regency Horizon ® HZ40E-11 Gas Fireplace
51-5/16" (1303mm)
Metal Stud
Non-combustible
Material
Non-combustible
10"
(252mm)
May be combustible (ie. 1/2" drywall)
5-11/16"
(144mm)
Non-combustible board
shipped with unit.
Metal Stud (header)
on edge
Metal Stud
Non-combustible board
shipped with unit.
Non-combustible board-faces and edges
MUST BE PRIMED.
Advertisement
Table of Contents
