Non-Combustible Requirements - Regency Fireplace Products Greenfire GF900C-NG1 Owners & Installation Manual

FRAMING & FINISHING
Finished Nailing Strip
Material Position
1/2" 1"
12mm 25mm
1" 1/2"
25mm 12mm
1-1/2" 0" (flush)
38mm
0mm

NON-COMBUSTIBLE REQUIREMENTS

Timber Stud
Regency GF900C-1 Gas Fireplace
Nailing Strip
" Forward
25mm
Unit
Nailing Strip
" Forward
12mm
Unit
Nailing Strip
Flush w/unit
Factory Set
Unit
1165mm
Non-combustible
Material
NOTE: A minimum thickness
of 12mm non-combustible
facing is required
Non-combustible
83mm
Note:
Depending on the material used for finishing, the nailing strips
must be set accordingly so that the finished material is always
at the 1-1/2" (38mm) edge of the flange.
Header
on edge
Timber Stud
installation
15