Advertisement
Submerge cylinder H3 in
the basin of water, then pull
back the piston.
H3
21
Submerge the nozzle of
H4 in the basin of water.
22
H4
23
Aim the nozzle back into
basin, then push the piston
back into the cylinder.
Pull the piston upward
to fill the cylinder with
water.
A14
Make sure C11 is rotated so
its teeth are on the front.
Assembling the Candy Claw Machine
Some water will remain
in the top of H3. Set
aside.
Water will remain in the
cylinder. Set aside.
Turn around
24
H3
H4
H3
7
Advertisement
