Thames & Kosmos Candy Claw Machine Experiment Manual page 8

P13
rem ipsum
C6
16
P13
C11
17
Tube assembly: There are three 450-mm tubes and one 240-mm tube. Connect them as shown here.
T1
Tube 1
T2 Tube 2
18
Connect the long end of
tube T1 to the nozzle of H1.
19
Connect the tube T2 to
the nozzle of H2.
20
6
Lubricate P13!
Move C6 back and forth
several times to coat the
inside of the cylinder (C4) with
oil. Reapply oil as necessary.
Lubricate P13!
P16 C12 P16
450 mm
450 mm
Submerge the loose end of T1
in the basin of water. Orient
the nozzle of H1 toward the
top, then move
the piston up
and down until
H1 and T1 are
filled with water.
Submerge the loose end of T2
in the basin of water. Orient
the nozzle of H2 toward the
top, then move
the piston up
and down until
the tube and the
top of H2 are filled
with water.
C6 C4
C11
C7
Move C11 back and forth several
times to coat the inside of the cylinder
with oil. Reapply oil as necessary.
P16
240 mm
H1
T1
H2
T2
Nozzle
Cylinder
C2
Piston
You have made
hydraulic 3 (H3).
Nozzle
Cylinder
Piston
You have made
hydraulic 4 (H4).
C12
450 mm
Water will remain in
the cylinder and tube.
Set aside.
Let the spring draw the
piston back into the
cylinder. Water will remain
in the tube. Set aside.
H3
H4
P16
H1
T1
T2