Table of Contents
Advertisement
Delivery and subsequent transportation of the equipment: The customer should
prepare his environment to accept the new product based on the installation
planning information provided, with assistance from an IBM Installation Planning
Representative (IPR) or IBM authorized service provider. In anticipation of the
equipment delivery, the final installation site should be prepared in advance such
that professional movers/riggers can transport the equipment to the final
installation site within the computer room. If for some reason, this is not possible
at the time of delivery, the customer will need to make arrangements to have
professional movers/riggers return to finish the transportation at a later date. Only
professional movers/riggers should transport the equipment. The IBM authorized
service provider will only perform minimal frame repositioning within the
computer room, as needed, to perform required service actions. The customer is
also responsible for using professional movers/riggers in the case of equipment
relocation or disposal.
Safety labels
As an added precaution, safety labels are often installed directly on products or
product components to warn of potential hazards. These can be either danger or
caution notices, depending upon the level of the hazard.
The actual product safety labels may differ from these sample safety labels:
xvi
IBM Ethernet Switch c-series Installation and User Guide
DANGER
Heavy equipment—personal injury or equipment damage might
result if mishandled. (D006)
>
500 lbs.
(>
227 kg.
)
DANGER
Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any
cover or barrier that contains this label. (L001)
DANGER
Rack-mounted devices are not to be used as a shelf or work space.
(L002)
DANGER
Multiple power cords. The product might be equipped with
multiple power cords. To remove all hazardous voltages,
disconnect all power cords. (L003)
Advertisement
Table of Contents
