Installing A Memory Card - Lexmark W850dn User Manual

1 Hard disk connector
2
Flash memory or firmware card connectors
3 Printer memory card connector

Installing a memory card

CAUTION—SHOCK HAZARD: If you are installing memory or option cards sometime after setting up the printer,
then turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any other
devices attached to the printer, then turn them off as well and unplug any cables going to the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1
Access the system board.
Note: This task requires a flathead screwdriver.
2
Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
Additional printer setup
18